Working with the Undershoot - Rising Edge Design Rule on a PCB in Altium NEXUS
Created: 三月 23, 2017 | Updated: 九月 26, 2019
| Applies to versions: 1.0, 1.1, 2.0, 2.1, 3.0, 3.1 and 3.2
您正在阅读的是 1.0. 版本。关于最新版本,请前往 Working with the Undershoot - Rising Edge Design Rule on a PCB in Altium NEXUS 阅读 4 版本
Rule category: Signal Integrity
Rule classification: Unary
Summary
This rule specifies the maximum allowable undershoot (ringing below the top value) on the rising edge of the signal.
Constraints
- Maximum (Volts) - the value for the maximum permissible undershoot on the rising edge of the signal.
How Duplicate Rule Contentions are Resolved
All rules are resolved by the priority setting. The system goes through the rules from highest to lowest priority and picks the first one whose scope expression matches the object(s) being checked.
Rule Application
Batch DRC and during Signal Integrity analysis.