Altium NEXUS 文档
...
对话框参考
Dialogs((A to F))_AD
PCB_Dlg-LayerFormEdit Layer_AD
Created: 四月 20, 2018 | Updated: 四月 20, 2018
| Applies to version: 1.1
您正在阅读的是 1.1. 版本。关于最新版本，请前往 PCB_Dlg-LayerForm((Edit Layer))_AD 阅读 5 版本
The Edit Layer dialog
Summary
This dialog allows you to edit the layer name and copper thickness.
Access
In the PCB editor, double-click on a layer tab at the bottom of the workspace.
Options/Controls
- Name - Create or edit the layer's name in this field.
- Copper thickness - Enter copper thickness for the layer in this field. Use the Ctrl+Q hotkey to switch between unit measurements (
mmormil).
When an internal plane is selected, the dialog include the following options:
- Name - Create or edit the internal plane's name in this field.
- Copper thickness - Enter copper thickness for the internal plane in this field. Use the Ctrl+Q hotkey to switch between unit measurements (
mmormil). - Net name - Choose a net from drop-down list to assign to the internal plane.
- Pullback - Enter the pullback value for the internal plane.