PCB_Cmd-PastePaste_AD

Applied Parameters: None

Summary

This command is used to place the last content cut/copied to the clipboard into any open PCB Editor or PCB Library Editor document.

Access

With one or more objects already available on the clipboard, this command can be accessed from the PCB Editor and the PCB Library Editor by:

• Choosing the Edit » Paste command from the main menus.
• Clicking the  button on the PCB Standard toolbar (PCB Editor) or the PCB Lib Standard toolbar (PCB Library Editor).
• Using the Ctrl+V keyboard shortcut.
• Right-clicking within the design workspace then choosing the Paste command from the context menu.

Use

After launching the command, the latest clipboard content will appear floating on the cursor. The cursor position relative to the content is determined by the reference point designated when Cut or Copy was used to add the selection to the clipboard. Position the content at the required position within the design workspace then click or press Enter to paste.

The following additional operations can be performed while the content is still floating on the cursor:

• Press the Spacebar to rotate the content counterclockwise or Shift+Spacebar for clockwise rotation. Rotation is in accordance with the value for the Rotation Step defined on the PCB Editor – General page of the Preferences dialog.
• Press the X or Y keys to flip the content along the X-axis or Y-axis respectively.
• Press the Alt key to constrain the direction of movement to the horizontal or vertical axis, depending on the initial direction of movement.

Tips

1. Objects are pasted onto the same layer that the source objects were copied from regardless of which layer is currently set as the active layer in the editor.

Applied Parameters: Mode=NORMAL

Summary

This command is used to place the text that has been copied from a supported OLE application into any open PCB Editor or PCB Library Editor document. The text is converted to, and pasted as, PCB string objects rather than a single OLE object. The supported file types include universal formats such as CSV and XLS format spreadsheets and DOC and RTF word documents.

Access

With text already copied to the clipboard from a supported OLE application, this command can be accessed from the PCB Editor and the PCB Library Editor by choosing the Edit » Paste Text command from the main menus.

Use

After launching the command, the copied content from the OLE application will appear floating on the cursor. Position the content at the required position within the design workspace then click or press Enter to paste. Then right-click or press Esc to complete the process and exit paste mode.

The following additional operations can be performed while the content is still floating on the cursor:

• Press the Spacebar to rotate the content counterclockwise or Shift+Spacebar for clockwise rotation. Rotation is in accordance with the value for the Rotation Step defined on the PCB Editor – General page of the Preferences dialog.
• Press the X or Y keys to flip the content along the X-axis or Y-axis respectively.

Applied Parameters: Mode=Special

Summary

This command is used to access the Paste Special dialog, which enables you to control what happens to certain object attributes when they are pasted back into the workspace.

Access

With one or more objects already available on the clipboard, this command is accessed from the PCB Editor and the PCB Library Editor by choosing the Edit » Paste Special command from the main menus.

Use

After launching the command, the Paste Special dialog will open. Depending on the specific content being pasted, the following attributes can be controlled:

• The objects can be pasted onto the current layer rather than the default paste behavior of pasting to the same layer from which the source objects were copied.
• Ability to keep any assigned net naming.
• Ability to duplicate the designator (for a pasted component).
• Ability to add a pasted component to the same Component Class as the original source component.

Setup the options as required then click the Paste button to start the paste operation. The content will appear floating on the cursor. The cursor position relative to the content is determined by the reference point designated when Cut or Copy was used to add the selection to the clipboard. Position the content at the required position within the design workspace then click or press Enter to paste.

The following additional operations can be performed while the content is still floating on the cursor:

• Press the Spacebar to rotate the content counterclockwise or Shift+Spacebar for clockwise rotation. Rotation is in accordance with the value for the Rotation Step defined on the PCB Editor – General page of the Preferences dialog.
• Press the X or Y keys to flip the content along the X-axis or Y-axis respectively.
• Press the Alt key to constrain the direction of movement to the horizontal or vertical axis, depending on the initial direction of movement.

Tips

1. Clicking the Paste Array button in the Paste Special dialog will open the Setup Paste Array dialog, which allows you to paste multiple copies of the clipboard objects into the current document.
2. You can also paste content onto the current layer directly in the workspace using the Alt+Insert keyboard shortcut.

Applied Parameters: Mode=Special|OnCurrentLayer=True

Summary

This command is used to paste objects onto the current layer, regardless of their original layer assignments.

Access

With one or more objects already available on the clipboard, this command is accessed from the PCB Editor and the PCB Library Editor by using the Alt+Insert keyboard shortcut.

Use

After launching the command, the latest clipboard content will appear floating on the cursor. The cursor position relative to the content is determined by the reference point designated when Cut or Copy was used to add the selection to the clipboard. Position the content at the required position within the design workspace then click or press Enter to paste. The object(s) will be pasted onto the currently active layer for the design, regardless of the layer(s) of origin. This can be verified in the Properties panel (when viewing the properties for a selected object) and, more readily, through the coloring of the pasted object(s), which will be the color of the current layer.

The following additional operations can be performed while the content is still floating on the cursor:

• Press the Spacebar to rotate the content counterclockwise or Shift+Spacebar for clockwise rotation. Rotation is in accordance with the value for the Rotation Step defined on the PCB Editor – General page of the Preferences dialog.
• Press the X or Y keys to flip the content along the X-axis or Y-axis respectively.
• Press the Alt key to constrain the direction of movement to the horizontal or vertical axis, depending on the initial direction of movement.

Applied Parameters: Array=True

Summary

This command is used to run the Paste Array feature, which allows you to paste multiple copies of the last content cut/copied to the clipboard into the current document. Both linear and circular array placements are supported.

Access

With one or more objects already available on the clipboard, this command can be accessed from the PCB Editor and the PCB Library Editor by clicking the  button on the Utility Tools drop-down () of the Utilities toolbar (PCB Editor) or the PCB Lib Standard toolbar (PCB Library Editor).

Use

After launching the command, the Setup Paste Array dialog will open. Enter the appropriate values in this dialog then click OK to place the array.

• If placing a linear array, you will be prompted to select the starting point for the array. Position the cursor then click or press Enter to place the array.
• If placing a circular array, you will be prompted to select the center point for the array, followed by the starting point for the array. Position the cursor in each casethen click or press Enter to place the array. The objects will be placed in counterclockwise fashion around the nominated center point.

Applied Parameters: Action=RubberStamp

Summary

This command is used to copy one or more selected objects and then paste multiple instances of the selection wherever required in the current document.

Access

With one or more objects currently selected in the main design workspace, this command can be accessed from the PCB Editor and PCB Library Editor by:

• Choosing the Edit » Duplicate command from the main menus.
• Clicking the  button on the PCB Standard toolbar (PCB Editor) or the PCB Lib Standard toolbar (PCB Library Editor).
• Using the Ctrl+R keyboard shortcut.

Use

First, ensure that the objects that you want to include in the process are selected in the main design workspace.

After launching the command, the cursor will change to a cross-hair and you will enter duplicate mode. The process involves the following sequence of steps:

1. You will first be prompted to select a reference point. This is the point by which the selection will be pasted. Move the cursor to the required position near to the selection then click or press Enter. A copy of the selection will appear floating on the cursor.
2. Move the cursor to the desired location in the workspace then click or press Enter to place the copy.
3. Another copy of the selection will appear floating on the cursor ready for placement.
4. Continue placing further instances of the copied selection (rather like using a rubber stamp) or right-click or press Esc to exit.

Tips

1. This command is used to copy and paste objects. As such, you cannot use the command for duplicating the children of group objects.