PCB_Cmd-MeasureSelectedObjectsMeasureSelectedObjects_AD

Created: 五月 10, 2016 | Updated: 三月 06, 2024 | Applies to versions: 1.0, 1.1, 2.0, 2.1, 3.0, 3.1, 3.2 and 4

您正在阅读的是 3.2. 版本。关于最新版本，请前往 PCB_Cmd-MeasureSelectedObjects((MeasureSelectedObjects))_AD 阅读 5 版本

This documentation page references Altium NEXUS/NEXUS Client (part of the deployed NEXUS solution), which has been discontinued. All your PCB design, data management and collaboration needs can now be delivered by Altium Designer and a connected Altium 365 Workspace. Check out the FAQs page for more information.

Parent page: PCB Commands

The following pre-packaged resource, derived from this base command, is available:

Measure Selected Objects

Applied Parameters: None

Summary

This command is used to measure the length of selected track in the current design.

Access

This command is accessed from the PCB Editor by choosing the Reports » Measure Selected Objects command from the main menus.

Use

First, ensure that the entire length of track that you wish to include in the measurement is selected.

After launching the command, an information dialog will appear, detailing the total measured length of the track. The measurement is also entered as an entry in the Messages panel.

Tips

Measurable primitives can be either routed track (net-aware) or lines (track that is not net-aware). Arc objects can also be included in the measurement.
Measurements are returned in both metric and imperial units.
To copy the contents of the information dialog to Windows Clipboard, press Ctrl+C when the dialog is open.

适合打印版本

If you find an issue, select the text/image and pressCtrl + Enterto send us your feedback.

PCB_Cmd-MeasureSelectedObjectsMeasureSelectedObjects_AD

Summary

Access

Use

Tips

Was this page helpful?