PCB_Cmd-FlipSelectedObjectsFlipSelectedObjects_AD

Created: 九月 26, 2017 | Updated: 三月 06, 2024 | Applies to versions: 1.0, 1.1, 2.0, 2.1, 3.0, 3.1, 3.2, 4 and 5

您正在阅读的是 2.0. 版本。关于最新版本，请前往 PCB_Cmd-FlipSelectedObjects((FlipSelectedObjects))_AD 阅读 5 版本

This documentation page references Altium NEXUS/NEXUS Client (part of the deployed NEXUS solution), which has been discontinued. All your PCB design, data management and collaboration needs can now be delivered by Altium Designer and a connected Altium 365 Workspace. Check out the FAQs page for more information.

Parent page: PCB Commands

The following pre-packaged resource, derived from this base command, is available:

Flip Selection

Applied Parameters: Axis=Horizontal

Summary

This command is used to flip the selected object(s) to the corresponding layer on the opposite side of the board.

Access

This command can be accessed from the PCB Editor and PCB Library Editor by:

Choosing the Edit » Move » Flip Selection command from the main menus.

Use

Ensure that only the objects that you want to flip are selected.

After launching the command, the selected objects will be flipped. For example, objects on the Top Layer will be flipped to the Bottom Layer; objects on the Top Overlay will be flipped to the Bottom Overlay, etc.

Tips

Use the Undo command to restore the flipped selection.
Designator and Comment text becomes mirrored after a flip action.
For a pad that exists on the Multi-Layer, flipping will essentially reverse the order of its XY size pairings and shapes. Therefore, if a style of Top-Middle-Bottom has been used and the shapes are initially Round-Rectangle-Octagonal, flipping will reverse the stack and thus the shapes from the top will become Octagonal-Rectangle-Round.

Flip Selection (from Active Bar)

Applied Parameters: Axis=Horizontal

Summary

This command is used to flip the selected object(s) to the corresponding layer on the opposite side of the board.

Access

This command can be accessed from the PCB Editor and PCB Library Editor by:

Locating and using the Flip Selection command on the Active Bar.

Click and hold on the active button to access a menu of all associated commands for that grouping. If the command has been recently used from the Active Bar, it will become the active/visible button. When other commands are available, it is indicated by a triangle at the bottom-right corner of the button.

Use

Ensure that only the objects that you want to flip are selected.

Tips

Use the Undo command to restore the flipped selection.
Designator and Comment text becomes mirrored after a flip action.
For a pad that exists on the Multi-Layer, flipping will essentially reverse the order of its XY size pairings and shapes. Therefore, if a style of Top-Middle-Bottom has been used and the shapes are initially Round-Rectangle-Octagonal, flipping will reverse the stack and thus the shapes from the top will become Octagonal-Rectangle-Round.

适合打印版本

If you find an issue, select the text/image and pressCtrl + Enterto send us your feedback.

PCB_Cmd-FlipSelectedObjectsFlipSelectedObjects_AD

Summary

Access

Use

Tips

Summary

Access

Use

Tips

Was this page helpful?