LibraryMigrator_Cmd-ImportConfigurationImportConfiguration_AD

Created: 十二月 05, 2018 | Updated: 十二月 13, 2018 | Applies to versions: 2.0, 2.1, 3.0, 3.1 and 3.2

您正在阅读的是 2.1. 版本。关于最新版本，请前往 LibraryMigrator_Cmd-ImportConfiguration((ImportConfiguration))_AD 阅读 4 版本

This documentation page references Altium NEXUS/NEXUS Client (part of the deployed NEXUS solution), which has been discontinued. All your PCB design, data management and collaboration needs can now be delivered by Altium Designer and a connected Altium 365 Workspace. Check out the FAQs page for more information.

Parent page: LibraryMigrator Commands

The following pre-packaged resources, derived from this base command, are available:

Import Library Migrator Configuration

Applied Parameters: None

Summary

This feature is used to import a library migrator configuration.

For information regarding the Library Migrator, click here.

Access

This command can be accessed from the Configuration page of the Library Migrator by clicking File » Import » Library Migrator Config from the main menus.

Use

After launching the command, the standard Open dialog opens in which you can specify the location and name of the Library Migrator Config file (*.lmcfg) to import. After clicking Open in the Open dialog, the Import Configuration dialog opens. Click Yes to proceed with importing the configuration; click No to cancel the import. If Yes is selected, the chosen Library Migrator Config file will be imported. If No is selected, the import is cancelled, the Import Configuration dialog closes and no import action is taken.

适合打印版本

If you find an issue, select the text/image and pressCtrl + Enterto send us your feedback.

LibraryMigrator_Cmd-ImportConfigurationImportConfiguration_AD

Summary

Access

Use

Was this page helpful?