WorkspaceManager_Err-ComponentImplementationsWithInvalidPinMappingsComponent Implementations with Invalid Pin Mappings_AD
This document is no longer available beyond version 21.0. Information can now be found here: Component Implementations with invalid pin mappings for version 24
Parent category: Violations Associated with Components
Default report mode:
Summary
This violation occurs when compiling an Integrated Library Package (*.LibPkg
) and the pin mapping between the schematic component and the linked model is found to be invalid.
Notification
If compiler errors and warnings are enabled for display on the schematic (enabled on the Schematic - Compiler page of the Preferences dialog), an offending object will display a colored squiggle beneath it. Hovering over the object will display a pop-up hint that summarizes the violation. A notification is also displayed in the Messages panel in the following format:
ComponentName: Could not find port <ModelPinNumber> on model <ModelName> for pin <ComponentPinNumber> - PCB model related
ComponentName: Could not map port <
ModelPinNumber> on
model <ModelName> to a pin
- simulation model related
where:
- ComponentName is the name of the component in the source schematic library.
- ModelPinNumber is the expected designator for the pin/pad that could not be found on the linked model.
- ModelName is the name of the model that is linked to the component.
- ComponentPinNumber is the designator of the pin on the source schematic component to which the erroneous pin of the model is mapped.
Recommendation for Resolution
Resolution involves accessing the mapping between the schematic symbol and the target domain model. To do this, you'll first need to be viewing the properties for the applicable schematic library component. Double-click on the entry for the component in the Components list of the SCH Library panel to access the Properties panel, with the properties for that component loaded.
If the PCB model related error message is displayed, select the model in the Footprint section of the panel and click the button underneath the list to access the PCB Model dialog. Once there, click on the Pin Map button to access the Model Map dialog. In the Component Pin Designator column, find the pin number flagged by the message (ComponentPinNumber). The violation arises because the corresponding entry in the Model Pin Designator column points to a pad designator that does not exist in the PCB model. Amend the entry as required. Typically there will be one-to-one mapping, with the designators on both sides the same.
If the simulation model related message is displayed, select the model in the Models section of the panel and click the button underneath the list to access the Sim Model dialog. Once there, click on the Port Map tab. This violation will arise when the model pin is not correctly mapped to a pin of the schematic component. This can happen when the entry for the model pin has been set to a pin that is already mapped, or to
Not Connected
. Amend the entry as required.
Tip
- Object hints will only appear provided the Enable Connectivity Insight option is enabled on the System - Design Insight page of the Preferences dialog. Use the controls associated with the Object Hints entry in the Connectivity Insight Options region of the page to determine the launch style for such hints (Mouse Hover and/or Alt+Double Click).