Altium Designer 文档
...
对话框参考
Dialogs((M to R))_AD
WorkspaceManager_Dlg-ConfirmManualMatchFormMatch Manually_AD
Created: 五月 10, 2019 | Updated: 四月 15, 2020
| Applies to versions: 18.1, 19.0, 19.1, 20.0 and 20.1
您正在阅读的是 22. 版本。关于最新版本，请前往 WorkspaceManager_Dlg-ConfirmManualMatchForm((Match Manually))_AD 阅读 20.2 版本
The Match Manually dialog
Summary
The Match Manually dialog is used to choose whether to manually match nets if there are nets that do not match on both sides (between the PCB and schematic).
Access
The dialog is accessed after updating a document when one or more nets are not able to be matched between the PCB and schematic. For example, it appears after a net name has been changed on the PCB or schematic, but the net name has not been changed on the corresponding design document.
Options/Controls
- Don't Show This Again - click to not show this dialog the next time nets cannot be matched.
- Yes - click to open the Match dialog in which you can manually match any unmatched schematic nets to unmatched PCB nets.
- No - click to remove the existing unmatched nets from the PCB and add the new nets that do not currently exist on the PCB. The Engineering Change Order dialog will open.