Altium Designer 文档
...
对话框参考
Dialogs((M to R))_AD
WorkspaceManager_Dlg-ComponentVariationFormPhysical Component Properties_AD
Created: 十一月 17, 2017 | Updated: 三月 21, 2018
| Applies to versions: 18.0, 18.1, 19.0, 19.1, 20.0, 20.1, 20.2 and 21
您正在阅读的是 21.0. 版本。关于最新版本，请前往 WorkspaceManager_Dlg-ComponentVariationForm((Physical Component Properties))_AD 阅读 22 版本
The Physical Component Properties dialog
Summary
The Physical Component Properties dialog provides controls to view the logical and physical designators for the selected component and select the component naming scheme.
Access
To access the dialog, switch the schematic editor to the compiled tab view (available when design variations exist) then double-click on any component.
Options/Controls
Annotation
- Logical Designator – this uneditable field displays the logical designator for the component.
- Visible – this checkbox indicates the current display state of the component's Designator – whether it is visible in the workspace or not. The checkbox is not editable.
- Annotate – enable this option to access the following controls to define the desired annotation. These controls are available only when Annotate is checked:
- Lock Physical Designator – select to enter a custom physical designator in the text box. The text box is available only when Lock Physical Designator is selected.
- Apply Naming Scheme – select to generate a designator using a current naming scheme (use the Annotate Options button to change the scheme).
- Annotate Options – use to access the Board Level Annotation Options dialog in which you can either choose a predefined naming scheme or specify your own custom scheme.
- Component– this uneditable field is populated based on the logical designator information for the component. The field and information shown will depend on the chosen naming scheme.
- Room Name – this uneditable field is populated based on the logical designator information for the component. The field and information shown will depend on the chosen naming scheme.
- Physical Designator – this uneditable field presents the calculated physical designator based on the logical designator information and the specified naming scheme that will be assigned when you click OK.