Storing Component Datasheets in an Altium Vault_AD

Altium Designer, in conjunction with Altium Vault (3.0 or later) caters for the ability to store component datasheets within an Altium Vault and, in doing so, link them to target Component Items. This allows you to more fully describe and support a component, in a centralized fashion, while reducing the reliance on external storage mediums (shared network drives for example). Storing datasheets next to the very items that need to reference them also means you no longer need to have a live internet connection, to consult a reference document that can often, and frustratingly, disappear without warning at the whim of the hosting website!

Attaching a Datasheet to a Component Item in the Vaults Panel

For an existing Component Item in an Altium Vault, one or more datasheets can be attached (uploaded) to that item - essentially creating a link between the component and the datasheet(s) - through the Vaults panel. While browsing the required Component Item, simply switch to its Data Sheet aspect view.

Through the Vaults panel, datasheet management for an existing Component Item is performed from within that item's Data Sheet aspect view.

Drag and Drop Attachment

By far the easiest method to attach a datasheet to a component is to simply select it within your Windows File Explorer, then drag and drop it onto the indicated area of the component's Data Sheet aspect view, in the Vaults panel. You can attach any number of datasheets to a component. Once dropped, the file(s) will be uploaded.

Attach one or more datasheets to an existing component in the vault by dragging and dropping the datasheets onto the component's Data Sheet aspect view.

Browse for a Datasheet to Attach

Alternatively, you can browse for the datasheets you wish to attach to the component. To do this, right-click within the component's Data Sheet aspect view, and choose the Add File command from the context menu. The standard Windows Open dialog will appear, with which to browse to, and open, the required datasheet(s). After clicking the Open button, the file(s) will be uploaded.

Attach one or more datasheets to an existing component in the vault using the traditional, dialog-based 'browse-and-open' approach.

Post-Attachment Management

Once uploaded and attached to a component, the datasheet will be presented in the Data Sheet aspect view in terms of its:

• Caption - this is the user-definable name for the attachment, presented in the Vaults panel, and also in the References sub-menu for a component, after it is placed on a schematic sheet. By default, after initial upload, this will be the filename of the attachment. Note that the actual filename for the datasheet is not changed in any way.
• File type - the type of file. A file of any format can be attached as a datasheet to the component.
• File size - the size of the attached file, on disk.

Example datasheets attached to a component, of varying file types.

After attaching a datasheet to a component, all management for that datasheet is performed from within the Data Sheet aspect view. This includes being able to quickly open the document by clicking on its entry.

Use the hyperlinked name of the datasheet to quickly access it. In this example, a PDF datasheet is opened in the applicable, external PDF Viewer application.

In addition, the following commands are available on the right-click context menu:

• Add File - use this command to attach another datasheet to the component. Once attached, the datasheet is available to all revisions of that Component Item, since it is linked at the item level.

• Edit - use this command to access the Caption dialog, with which to modify the caption for the datasheet (its display name within the software) as required.
• Delete - use this command to effectively remove the datasheet attachment from the component. Only the link between the Component Item and underlying Datasheet Item is deleted. The latter itself is only deleted if no other component is linked to that datasheet.

• Open - use this command to open the datasheet. The attachment will open either within Altium Designer (for example a txt document), or in the applicable external application.
• Save As - use this command to save the attachment to your local media or network drive. Use the standard Windows Save As dialog to determine where, and with what name, the file is saved.

The Datasheet Item

Facilitating the ability to attach a datasheet to a component is the Datasheet Item. When a datasheet is attached to a component, the actual datasheet file is uploaded into a single revision of this item type, and the Component Item linked to that Datasheet Item.

When a new datasheet file is attached to a component, and that file has not already been uploaded (attached to a different component), the resulting Datasheet Item will be created in a Datasheets sub-folder of the active folder.

The mechanics of an uploaded datasheet - the Datasheet Item is linked to the Component Item.

Attaching a Datasheet in the CmpLib Editor

One or more datasheets can also be attached to one or more components, while defining component(s) through the Component Library Editor. This, for example, allows you to quickly attach the same required datasheet(s) to all components in a particular family.

Linking various datasheets, as seen from the perspective of editing a component in the Component Library Editor.

Attaching datasheets to a component definition involves a sequence of steps, summarized here and detailed in the sections thereafter:

1. Enabling the use of datasheets.
2. Uploading datasheets to a selected component.
3. Assigning uploaded datasheets to other component definitions.

Enabling the Use of Datasheets

To be able to attach datasheets to a component definition in the editor, you need to first enable the use of datasheets. This is done from the Required Models/Parameters region of the editor. Simply click on the Add control below at the bottom of the region, and choose Datasheet from the context menu.

Enable the use of datasheets for components.

Uploading Datasheets to a Selected Component

Having enabled the use of datasheets, you now need to upload them. Essentially, you upload any number of datasheets for the currently selected component, but can then assign all, or specific sheets, across the various components being defined. Once the Datasheet entity has been added to the Required Models/Parameters region, a Datasheet entry will be presented in the Model Links region. Clicking on this will show the list of datasheets currently assigned (linked) to the selected component, in the preview region.

The Datasheet 'bucket', and the available listing of uploaded datasheets. In reality, each datasheet is uploaded into a unique underlying Datasheet Item.

With a component definition selected in the editor, a datasheet can be uploaded to that component in various ways:

• Dragging and dropping from Windows File Explorer to the preview region, or the Datasheets cell for that component definition.
• Dragging and dropping a datasheet link from a web page in an external web browser, to the preview region, or the Datasheets cell for that component definition.
• Right-clicking in the preview region and choosing the Add File command from the context menu. Use the Open dialog to browse to, and open, the required datasheet(s).

Example demonstrating attachment of datasheets from a manufacturers website. The first component is selected and the datasheet attached by dragging and dropping onto the
preview region. Then the second component is selected - notice the previous datasheet attached to the first component only. A different datasheet is then dragged and dropped,
this time onto the Datasheets cell for that component.

Once uploaded, you can:

• Open a datasheet by clicking on its entry in the preview region (or by right-clicking on its entry and choosing Open from the context menu).
• Change the caption for a datasheet, by right-clicking on its entry in the preview region and choosing Edit from the context menu. Changing a caption for a datasheet is local to that component.
• Remove the datasheet from the component, by right-clicking on its entry in the preview region and choosing Delete from the context menu.
• Download the file by right-clicking on its entry in the preview region and choosing Save As from the context menu.

Assigning Uploaded Datasheets to Other Component Definitions

When you initially attach (upload) a datasheet, you are doing so for the currently selected component. But the beauty of the system is that all uploaded datasheets are available for linkage to other components being defined in the CmpLib as well. Simply click the control at the right of the Datasheets cell to access a listing of the available datasheets, and use the associated checkboxes to attach/remove a datasheet to/from the component.

Example demonstrating attachment of datasheets that have already been uploaded, to another component definition.

Accessing a Datasheet from the Placed Component

Once a vault component is placed onto a schematic document within a design project, you can access any vault-based datasheets that are linked to it, from the right-click References context sub-menu.

Accessing vault-based datasheets from the placed component on the schematic sheet.