Altium Designer 文档
...
Schematic Design Objects in Altium Designer
Working with an Elliptical Arc Object on a Schematic Sheet in Altium Designer
Configuring Schematic Elliptical Arc Object Properties in Altium Designer
Created: 四月 08, 2021 | Updated: 四月 09, 2021
| Applies to version: 21
This document is no longer available beyond version 21.0. Information can now be found here: Elliptical Arc Properties for version 25
Parent page: Elliptical Arc
Schematic Editor object properties are definable options that specify the visual style, content and behavior of the placed object. The property settings for each type of object are defined in the following way.
- Post-placement settings – all Elliptical Arc object properties are available for editing in the Elliptical Arc dialog and the Properties panel when a placed Elliptical Arc is selected in the design space.
Location (Properties panel only)
- (X/Y)
- X (first field) - the current X (horizontal) coordinate of the reference point of the arc, relative to the current design space origin. Edit to change the X position of the arc. The value can be entered in either metric or imperial; include the units when entering a value whose units are not the current default.
- Y (second field) - The current Y (vertical) coordinate of the reference point of the arc, relative to the current origin. Edit to change the Y position of the arc. The value can be entered in either metric or imperial; include the units when entering a value whose units are not the current default.
Properties
- Width - use the drop-down to select the desired width.
- X-Radius - the x-radius of the elliptical arc, which may be edited.
- Y-Radius - the y-radius of the elliptical arc, which may be edited.
- Start Angle - the start angle of the elliptical arc, which may be edited.
- End Angle - the end angle of the elliptical arc, which may be edited.