Configuring Schematic Bus Entry Object Properties in Altium Designer
Created: 四月 08, 2021 | Updated: 四月 08, 2021
| Applies to version: 21
This document is no longer available beyond version 21.0. Information can now be found here: Bus Entry Properties for version 24
Parent page: Bus Entry
Schematic Editor object properties are definable options that specify the visual style, content and behavior of the placed object. The property settings for each type of object are defined in two different ways:
- Pre-placement settings – most Bus Entry object properties, or those that can logically be pre-defined, are available as editable default settings on the Schematic - Defaults page of the Preferences dialog (accessed from the
button at the top-right of the design space). Select the object in the Primitive List to reveal its options on the right.
- Post-placement settings – all Bus Entry object properties are available for editing in the Bus Entry dialog and the Properties panel when a placed Bus Entry is selected in the design space.
Properties
- Start (X/Y)
- X (first field) - the current X (horizontal) coordinate of the reference point of the object relative to the current design space origin. Edit to change the X position of the object. The value can be entered in either metric or imperial; include the units when entering a value whose units are not the current default.
- Y (second field) - The current Y (vertical) coordinate of the reference point of the object relative to the current origin. Edit to change the Y position of the object. The value can be entered in either metric or imperial; include the units when entering a value whose units are not the current default.
- End (X/Y) -
- X (first field) - the current X (horizontal) coordinate of the reference point of the object relative to the current design space origin. Edit to change the X position of the object. The value can be entered in either metric or imperial; include the units when entering a value whose units are not the current default.
- Y (second field) - The current Y (vertical) coordinate of the reference point of the object relative to the current origin. Edit to change the Y position of the object. The value can be entered in either metric or imperial; include the units when entering a value whose units are not the current default.
- Size (X/Y) - the bus entry size.
- Width - use the drop-down to select the desired width.
- Color - click the color box to select the desired color for the object.