Altium Designer 文档
...
Schematic Design Objects in Altium Designer
Working with a Blanket Object on a Schematic Sheet in Altium Designer
Configuring Schematic Blanket Object Properties in Altium Designer
Created: 九月 24, 2019 | Updated: 十月 01, 2019
| Applies to versions: 20.0, 20.1 and 20.2
您正在阅读的是 20.0. 版本。关于最新版本，请前往 Configuring Schematic Blanket Object Properties in Altium Designer 阅读 21 版本
Parent page: Blanket
Schematic Editor object properties are definable options that specify the visual style, content and behavior of the placed object. The property settings for each type of object are defined in two different ways:
- Pre-placement settings – most Blanket object properties, or those that can logically be pre-defined, are available as editable default settings on the Schematic - Defaults page of the Preferences dialog (access from the
button at the top-right of the workspace). Select the object in the Primitive List to reveal its options on the right.
- Post-placement settings – all Blanket object properties are available for editing in the Blanket dialog and the Properties panel when a placed Blanket is selected in the workspace.
Properties
- Border Width - use the drop-down to select the desired border width. Choices are: Smallest, Small, Medium, and Large.
- Line Style - use the drop-down to select the desired line style. Choices are: Solid, Dashed, Dotted, and Dash Dotted.
- Border Color - click the color box to select the desired color for the border.
- Fill Color - click the color box to select the desired color for the fill.
- Collapsed and Disabled - check to collapse and disable blankets.