PTC Creo Collaboration

您正在阅读的是 18.0. 版本。关于最新版本,请前往 PTC Creo Collaboration 阅读 19.0 版本

Design collaboration between Altium NEXUS and PTC Creo® is enabled by the central capabilities the Altium NEXUS Server, where collaborative data is bridged by the NEXUS Collaboration panel and a specialized Altium software addition for Creo – the PTC Creo CoDesigner plugin.

Software:

  • Altium NEXUS Client
  • Altium NEXUS Server with Firebird database
  • PTC Creo® 3M50
  • PTC Creo CoDesigner plugin

PTC Creo to Altium NEXUS Collaboration installation

Altium NEXUS side:

The Collaboration panel is installed by default in Altium NEXUS and can be opened from the  button, or by selecting Views » Panels » Collaboration.

Note that the MCAD Collaboration is available only when a PCB document is active.

No additional licenses are required on the Altium NEXUS side

PTC Creo side:

It is assumed that a licensed installation of PTC Creo 2.0 or later is on the test machine.

  1. Unpack the plugin installation package on the PC where PTC Creo is installed.
  2. Run the setup file; Altium.Designer.PtcCreo.InstallUI.exe.
  3. In the installation Wizard dialog, specify a PTC Creo version and an installation path, and click INSTALL.
  4. After installation is successfully completed, click OK to close the installation Wizard.

The Collaboration plugin is now installed, automatically un-locked and registered in the PTC Creo installation. In Creo, the Collaboration panel can be opened from Tools » Altium » CollaborationPanel.

Pre-configuration

Altium NEXUS side:

  • Login to a Collaboration server (NEXUS server).
  • (optional) Specify a 3D Model search path: see the PCB Editor – Models page in the Preferences dialog.

PTC Creo side:

  • Login to a Collaboration server (NEXUS server).
    A Login form will be displayed automatically after clicking the New Board Assembly or Open Managed Project button.
  • (optional) Specify a local storage of exported 3D Models. Collaboration panel » cogwheel icon » Settings » Creo PTC Parts Library Folder.
NEXUS Server Users must have admin rights to use a Collaboration tool.
 

Getting started with Creo to NEXUS Collaboration

  1. Create new collaboration project

To create a new collaboration project on the PTC Creo side, open the Collaboration panel and choose New Board Assembly » Create New Project...  Specify a project name and click OK.

A new board assembly with the default board size will be created.

A first synchronization with Altium NEXUS to transfer the board thickness and MCAD origin is highly recommended at this step.
  1. First synchronization of Altium NEXUS PCB document with Creo board assembly

To synchronize the ECAD design side with the newly created Creo assembly:

  • Open Collaboration panel on the Creo side, click the Push button,  add a comment if needed and click Post. Now all collaboration data are downloaded to the collaboration server.
  • Then go to Altium NEXUS and sign in to the Collaboration server. Select  File » Open Managed Project,  choose an appropriate project and open it. Next, add a new PCB document to the project and save it, open the Collaboration panel and click Pull. A table with list of changes between the Altium PCB design and Creo board assembly will be displayed in the Collaboration panel.
  • To accept a change, check it in the Accept column and click Accept. A new board outline will be applied to the PCB Board in the main PCB Editor.

Define a Board Layer Stack at this step.

It is necessary to define a Layer Stack for the Collaboration design before placing 3D Models and mounting holes on the Creo side. This is because a changed board thickness can affect clearances between 3D Models and a board assembly.
  1. First synchronization of Creo board assembly with Altium NEXUS PCB document

To synchronize the Creo assembly with the the ECAD design:

  • Open the Collaboration panel on the Altium NEXUS side, click the Push button, add a comment if needed and click Post. Now all collaboration data are downloaded to the collaboration server.
  • Then in Creo, open the Collaboration panel and click Pull. The board outline change related to a board thickness will be indicated on the Creo side.
  • Accept this change to synchronize board thickness between Altium NEXUS and Creo.

The MCAD designer can begin to define a board shape, then add and place parts of a device enclosure.

If you find an issue, select the text/image and pressCtrl + Enterto send us your feedback.

软件的功能取决于您购买的Altium产品级别。您可以比较Altium Designer软件订阅的各个级别中包含的功能,以及通过Altium 365平台提供的应用程序所能实现的功能。

如果您在软件中找不到某个讨论过的功能,请联系Altium销售团队以获取更多信息。