Parent page: PCB Commands
The following pre-packaged resource, derived from this base command, is available:
Flip Selection
Applied Parameters: Axis=Horizontal
Summary
This command is used to flip the selected object(s) to the corresponding layer on the opposite side of the board.
Access
This command is accessed from the PCB Editor, and PCB Library Editor, by choosing the Edit » Move » Flip Selection command, from the main menus.
Use
Firstly, ensure that only the objects that you wish to flip are selected.
After launching the command, the selected objects will be flipped. For example, objects on the Top Layer will be flipped to the Bottom Layer, objects on the Top Overlay will be flipped to the Bottom Overlay, and so on.
Tips
- Use the Undo command to restore the flipped selection.
- Designator and Comment text becomes mirrored after a flip action.
- For a pad that exist on the Multi-Layer, flipping will essentially reverse the order of its XY size pairings and shapes. Therefore, if a style of Top-Middle-Bottom has been used, and the shapes are initially Round-Rectangle-Octagonal, flipping will reverse the stack and thus the shapes, from the top, will become Octagonal-Rectangle-Round.
Altium Designer 文档
...
命令参考
((PCB Commands))_AD