IntegratedLibrary_Dlg-AddRemoveLibrariesFormAvailable Libraries_AD

Summary

The Available Libraries dialog provides controls to add or remove libraries to and from the project and designate the hierarchy of project these libraries (Project tab), install libraries into this installation of Altium Designer (Installed tab), and specify library search paths (Search Path tab).

Access

The Available Libraries dialog can be accessed from the Libraries panel in either of the following ways:

• Click the Libraries button in the upper left corner of the Libraries panel.
• Right-click on a component in the Component List of the Libraries panel then select Add or Remove Libraries.

Options/Controls

Project Tab

The Project tab lists all libraries that have been added to current project. You can also use this tab to add libraries to the project or change the order of the project libraries.

The Project tab

Grid

• Project Libraries - displays the file names of library documents used in the active project, including the file extension.
• Path - allows you to see where the library is saved by displaying the file path.
• Type - displays the type of library document listed, e.g., a PCB or schematic library.

Buttons

• Move Up - click to move the selected project library up in the list. The ordering of the list is important when the list is used for the model-link verification when, for example, compiling the project, synchronizing, or running a simulation. 
• Move Down - click to move the selected project library down in the list. The ordering of the list is important when the list is used for the model-link verification when, for example, compiling the project, synchronizing, or running a simulation.
• Add Library - click to open your file browser and select a library file from your local drive that you want to add to the list of project libraries.
• Remove - click this button to remove the selected project library from this list.
• Request a Part - click to open your browser to search for a part.

Installed Tab

This tab lists all libraries that are currently available for this installation. You can also install new libraries, remove libraries, and activate or deactivate libraries.

Grid

• Installed Libraries - displays the file names of installed libraries used in the active project, including the file extension.
• Activated - check or uncheck to designate whether a library is activated or not. Only activated libraries are accessible from the Libraries panel.
• Path - displays the file name of the library.
• Type - displays the type of library.

Lower Region

• Library Path Relative To: - lists the relative path.
• Move Up - click to move the selected installed library up in this list. The ordering of the list is important when the list is used for the model-link verification when, for example, compiling the project, synchronizing, or running a simulation.
• Move Down - click to move the selected installed library down in this list. The ordering of the list is important when the list is used for the model-link verification when, for example, compiling the project, synchronizing, or running a simulation.
• Install - click to open a dialog in which you can select a library file that you want to add to the list. Select either Install from file (your local drive) or Install from server (from a managed content server) from the drop-down.
• Edit - click to edit the selected installed library.
• Remove - click to remove the highlighted installed library from this list.

• Request a Part - click to open your browser to search for a part.

Search Path Tab

This tab allows you to view and manage defined search paths.

The Search Path tab

Grid Region

• Search Path Libraries - displays the file names of installed libraries used in the active project, including the file extension.
• Path - displays the path of the library.
• Type - displays to what type of library the search path leads.

Buttons

• Paths - click to open the Project Options - Search Paths dialog in which you can define and manage search paths. This allows you to make model libraries/files that are neither added to the project nor installed available to the current project. 
• Refresh - click to refresh or update the search paths and ensure that the search path library list is current.
• Request a Part - click to open your browser to search for a part.