Configuring Draftsman Board Fabrication View Object Properties in Altium Designer

您正在阅读的是 18.0. 版本。关于最新版本,请前往 Configuring Draftsman Board Fabrication View Object Properties in Altium Designer 阅读 21 版本

Parent page: Board Fabrication View

Draftsman object properties are definable options that specify the visual style, content and behavior of the placed object. The property settings for each type of object are defined in two different ways:

  • Pre-placement settings – most Board Fabrication View object properties, or those that can logically be pre-defined, are available as editable default settings on the Draftsman - Defaults page of the Preferences dialog (access from the  button at the top-right of the workspace). Select the object in the Primitive List to reveal its options on the right.
  • Post-placement settings – all Board Fabrication View object properties are available for editing in the Properties panel when a placed Fabrication View is selected in the workspace.

The Fabrication View default settings in the Preferences dialog and the Board Fabricationy View mode of the Properties panel    The Fabrication View default settings in the Preferences dialog and the Board Fabricationy View mode of the Properties panel

In the below properties listing, options that are not available as default settings in the Preferences dialog are noted as 'Properties panel only'.

Scale

  • Scale – select the drop-down to choose from a range of preset size scale ratios. This option is not available if the Use Custom Scale option is checked.
  • Use Custom Scale – select this option to enter a specific scale in its associated field. The scaling of the drawing object is relative to 1, where 0.9 would represent a scale of 90%.

Title

  • Title – the title name string that will be displayed (if enabled) with the Fabrication View object – use the associated button to toggle its visibility. Enter the title name and any desired system/custom parameters to create a meaningful name for the placed view. See the Parameters section in the panel's Document Options mode for a list of the currently available parameters.
  • Location – use the drop-down to choose from a range of relative locations for the title. The Manual option is automatically selected if the title is manually moved (dragged and dropped to a new location).
  • Font – sets the displayed font used for the view's title string.
    • Use Document Font checkbox selected – the title font used is that defined by the document options. See the Document Font entry in General section of the Properties panel when in Document Options mode.
    • Use Document Font not selected – use the drop-down menus to choose the desired font type and size and select the lower buttons to enable text attributes. The associated color button () opens the color selector where the font color can be specified by RGB or HEX value, by freeform selection, or from a range of presets. Note that the slider control sets the color Opacity level, where 0% represents full transparency.

Style

  • Border Line – the thickness and style of the Fabrication View's border/outline. Use the line weight drop-down menu to choose from a range of line thickness presets and the line pattern menu to choose from a range of line styles. The associated color button () opens the line color selector dialog as outlined above.

Properties

  • Layer (Properties panel only) – the board layer data that is used as a source for the placed Fabrication View. Use the drop-down menu to select from the range of physical layers available in the board design.
    To create a Fabrication Document Template that will include all fabrication-related Layers, set this option to All (for document template) then save the page as a Document Template (*.DwfDot). When the Document Template is subsequently used for a new Draftsman document, a separate page will be created for each Fabrication Layer (Signal and Component layers) of the active board design.
    To create a Fabrication Document Template that will include all fabrication-related Layers, set this option to All (for document template) then save the page as a Document Template (*.DwfDot). When the Document Template is subsequently used for a new Draftsman document, a separate page will be created for each Fabrication Layer (Signal and Component layers) of the active board design.
  • View Side – the direction of view used to render the board drawing. Use the drop-down menu to specify the Top or Bottom view direction.
  • Rotation – the angle of rotation used to render the board drawing as applied by the drop-down menu.
  • Drawing Mode – how board conductors are rendered. Use the drop-down to select either Full (solid) or Simplified (as lines) drawing mode. Fills are rendered as selected below.
  • Polygon Fill Mode – how polygons fills are rendered. Use the drop-down to set fills to be drawn as solid , hatched or as simple outlines.
  • Show Out of Board Copper – check to enable the display of any copper that has been placed beyond the board design's boundary.
If you find an issue, select the text/image and pressCtrl + Enterto send us your feedback.

软件的功能取决于您购买的Altium产品级别。您可以比较Altium Designer软件订阅的各个级别中包含的功能,以及通过Altium 365平台提供的应用程序所能实现的功能。

如果您在软件中找不到某个讨论过的功能,请联系Altium销售团队以获取更多信息。