Altium Designer 文档
...
对话框参考
Dialogs((A to F))_AD
ActiveBOM_Dlg-PcbSourceSelectionDialogChoose PCB to Use_AD
Created: 一月 13, 2023 | Updated: 一月 13, 2023
| Applies to version: 21
您正在阅读的是 22.0. 版本。关于最新版本，请前往 ActiveBOM_Dlg-PcbSourceSelectionDialog((Choose PCB to Use))_AD 阅读 21 版本
The Choose PCB to Use dialog
Summary
The Choose PCB to Use dialog is used to select which PCB parameters are to be made available in an ActiveBOM when a PCB project includes more than one PCB file.
Access
The dialog is accessed by clicking 
in the Sources region on the Columns tab of the ActiveBOM Properties panel.
Options/Controls
- PCB Files - this is a list of all PCB files detected in the current PCB project. Select the PCB to use then click OK. The following PCB-specific parameters will be extracted from that PCB and presented in the Columns list, ready to be included in ActiveBOM.
- Center-X (Mil) - geometric center of the component
- Center-Y (Mil)
- Center-X (mm)
- Center-Y (mm)
- Layer
- Pad-X (Mil) - location of Pad 1
- Pad-Y (Mil)
- Pad-X (mm)
- Pad-Y (mm)
- Ref-X (Mil) - location of component reference point (as defined in the PCB library editor)
- Ref-Y (Mil)
- Ref-X (mm)
- Ref-Y (mm)
- Rotation