Parent page: Schematic Commands
The following pre-packaged resources, derived from this base command, are available:
Applied Parameters: Action=AddToProject
This command is used to add port cross-referencing information to all source schematic documents in the active project.
This command is accessed from the Schematic Editor by choosing the Reports » Port Cross Reference » Add To Project or Update On Project command from the main menus.
After launching the command a string will be included or updated, where applicable, next to each port, across all sheets in the active project, detailing the sheet name and grid reference of the entity to which the port connects - other ports of the same name (when the Net Identifier Scope is Flat or Global), or a sheet entry in a parent sheet symbol (when the Net Identifier Scope is Hierarchical, or Strict Hierarchical).
Applied Parameters: ContextSensitive=True|Action=AddToProject
This command is accessed from the Schematic Editor by right-clicking in the workspace - away from any design objects - and choosing the Sheet Actions » Port Cross Reference » Add To Project or Update On Project command from the main menus.
Applied Parameters: Action=RemoveFromProject
This command is used to remove port cross-referencing information from all source schematic documents in the active project.
This command is accessed from the Schematic Editor by choosing the Reports » Port Cross Reference » Remove From Project command, from the main menus.
After launching the command, the cross reference parameter (CrossRef) will be removed from each applicable port, across all sheets in the active project.
Applied Parameters: ContextSensitive=True|Action=RemoveFromProject
This command is accessed from the Schematic Editor by right-clicking in the workspace - away from any design objects - and choosing the Sheet Actions » Port Cross Reference » Remove From Project command, from the main menus.