Документация Altium Designer
...
((Dialog Reference))_AD
Dialogs((A to F))_AD
Custom AutoFilter
Created: октября 13, 2016 | Updated: октября 17, 2017
| Applies to versions: 15.1, 16.0, 16.1, 17.0 and 17.1
Вы просматриваете версию 16.1. Для самой новой информации, перейдите на страницу Custom AutoFilter для версии 18.1
The Custom AutoFilter dialog
Summary
The Custom AutoFilter dialog is used to filter a column in a table or grid.
Access
The dialog is accessed by clicking 
in the header of a column, then selecting Custom when filtering a column from any smart table grid.
Options/Controls
- Use the first drop-down to select the desired filter. Enter a value in the textbox (e.g., to show only 16MHz items, enter 16MHz) or use the drop-down to select the type of filter data.
- And/Or - select And or Or to specify the filtering condition if desired.
- Use the second drop-down to select the desired second filter if desired. Enter a value in the textbox (e.g., to show only 16MHz items, enter 16MHz) or use the drop-down to select the type of filter data.