WorkspaceManager_Dlg-CloneProjectDialogFormClone Project_AD

Вы просматриваете версию 22.0. Для самой новой информации, перейдите на страницу WorkspaceManager_Dlg-CloneProjectDialogForm((Clone Project))_AD для версии 21
 

Summary

The Create Project Copy dialog is used to copy a managed project, which is then stored in a repository connected to a server. By default, the original project name will be used with the suffix ' - Copy'.

No special permissions are required to clone a project. The cloned project is an exact copy of the original managed project and has the same editing properties with no restrictions, i.e. you cannot create a 'read-only' project.

Access

The dialog is accessed in the following ways:

  • Right-click on a managed project in the Projects panel then select Clone from the context menu.
  • From the Explorer panel, select a project within the Projects folder then click the  button to access the Clone command.
  • From the Open Project dialog, select the Open Project As Copy link from the Project Information region located in the Server and Workspace tabs.
The project must be a managed one, that is, currently stored within a repository of a managed content server. Also, to have the command appear on the context menu, you must be actively signed into that server.
The copied project will be made in the same design repository as the original – you cannot change this as part of the copying process.

Options/Controls

Simple Mode

  • Project Name - the name of the managed project.
  • Description - enter the desired description of the managed project.
  • Advanced / Simple- click to access the Advanced/Simple version of the dialog.

Advanced Mode

  • Folder - click to open the Choose Folder dialog, which is a trimmed-down version of the Explorer panel, where you can filter through various server folders. Select the folder in which you'd like the copied project to reside then click OK.
  • Local Storage - click to select the field where you would like the project to be stored on your hard drive prior to its committal to the centralized Design Repository. The default location is defined in the System - Default Locations page of the Preferences dialog.
If you find an issue, select the text/image and pressCtrl + Enterto send us your feedback.
Примечание

Набор доступных функций зависит от вашего уровня доступа к продуктам Altium. Ознакомьтесь с функциями, включенными в различные уровни Подписки на ПО Altium, и функциональными возможностями приложений, предоставляемых платформой Altium 365.

Если вы не видите в своем ПО функцию, описанную здесь, свяжитесь с отделом продаж Altium, чтобы узнать больше.

Content