UnifiedComponent_Dlg-CreateNewComponentCreate New Component_AD

Вы просматриваете версию 22.0. Для самой новой информации, перейдите на страницу UnifiedComponent_Dlg-CreateNewComponent((Create New Component))_AD для версии 21

The Create new component dialog
The Create new component dialog

Summary

The Create new component dialog is used to select the type of component when adding a new component. Once added, the component will be displayed in the Projects panel, and the Single Component Editor will open.

Access

The dialog is accessed from any editor in the following ways:

  • Click File » New » Component from the main menus.
  • From the Manufacturer Part Search panel, right-click on a component then select Acquire from the context menu.

To access this dialog, you must be signed into a Workspace.

Learn more about Accessing Your Workspace

Options/Controls

  • Search – use the text box to enter the component type for which you want to search. The list of component types will be filtered according to the search string entered.
  • Component type list – select the desired component type from the list, then click OK, or double-click on the component type.

    • If a component type is referenced by multiple Component Templates, these Templates will be presented under the entry of this component type.
    • If a Component Template has no default component type defined, it will be presented under the <Undefined> entry of the Create new component dialog.
    When connected to an Altium 365 Workspace, note that Component Templates are not supported with the Standard Subscription Plan. As such, this functionality will not be available with this level of access to Altium 365.
After double-clicking a component type or selecting a component type and clicking OK, the Single Component Editor opens as the active document in the main design window from where you can define the new component (displayed as New component in the Projects panel) in terms of description, parameters, etc. After defining the new component, the Projects panel will display the new component.
If you find an issue, select the text/image and pressCtrl + Enterto send us your feedback.
Примечание

Набор доступных функций зависит от вашего уровня доступа к продуктам Altium. Ознакомьтесь с функциями, включенными в различные уровни Подписки на ПО Altium, и функциональными возможностями приложений, предоставляемых платформой Altium 365.

Если вы не видите в своем ПО функцию, описанную здесь, свяжитесь с отделом продаж Altium, чтобы узнать больше.