Configuring Schematic Round Rectangle Object Properties in Altium Designer
Created: сентября 26, 2019 | Updated: октября 16, 2019
| Applies to versions: 20.0, 20.1 and 20.2
Вы просматриваете версию 20.0. Для самой новой информации, перейдите на страницу Configuring Schematic Round Rectangle Object Properties in Altium Designer для версии 21
Parent page: Round Rectangle
Schematic Editor object properties are definable options that specify the visual style, content and behavior of the placed object. The property settings for each type of object are defined in two different ways:
- Pre-placement settings – most Round Rectangle object properties, or those that can logically be pre-defined, are available as editable default settings on the Schematic - Defaults page of the Preferences dialog (access from the
button at the top-right of the workspace). Select the object in the Primitive List to reveal its options on the right.
- Post-placement settings – all Round Rectangle object properties are available for editing in the Round Rectangle dialog and the Properties panel when a placed Round Rectangle is selected in the workspace.
Location (Properties panel only)
- (X/Y) - the X (horizontal) coordinate and Y (vertical) coordinate of the object.
Properties
- Width - the width of the rectangular shape, which may be edited.
- Height - the height of the rectangular shape, which may be edited.
- Corner X-Radius - the curvature of the rectangle's corners in the horizontal plane, which may be edited.
- Corner Y-Radius - the curvature of the rectangle's corners in the vertical plane, which may be edited.
- Border - use the drop-down to select the default border width from the available choices: Smallest, Small, Medium, or Large. Click on the color box to change the color.
- Fill Color - enable to use a fill color. Click on the color box to select the color.