Документация Altium Designer
...
((Dialog Reference))_AD
Dialogs((A to F))_AD
Sch_Dlg-RefactorDeviceSheetSymbolFormConvert Device Sheet to Schematic Sheet_AD
Created: июля 28, 2015 | Updated: июня 16, 2017
| Applies to versions: 15.1, 16.0, 16.1, 17.0 and 17.1
Вы просматриваете версию 16.1. Для самой новой информации, перейдите на страницу Sch_Dlg-RefactorDeviceSheetSymbolForm((Convert Device Sheet to Schematic Sheet))_AD для версии 21
The Convert Device Sheet to Schematic Sheet dialog.
SUMMARY
This dialog allows designers to convert device sheets to schematic sheets.
ACCESS
The dialog can be accessed from the Sch Editor in the following ways:
- Right-click on a device sheet symbol and select Refactor » Convert Selected Device Sheet to Schematic Sheet from the context menu.
- From the toolbar, select Edit » Refactor » Convert Selected Device Sheet to Schematic Sheet.
OPTIONS/CONTROLS
Target Schematic Sheet Location - By default, the new Schematic Sheet is added to the current project. Click on the 
button at the end of this field to choose a different target location for the new schematic sheet.
Mode
- Create schematic sheet from device sheet and update all relevant sheet symbols in the current project - Choose this option to convert the currently selected device sheet symbol to a sheet symbol and create a schematic sheet in the target location. All relevant sheet symbols in the current project are updated. This option is enabled by default.
- Create schematic sheet from device sheet and update only the current sheet symbol - Choose this option to convert the currently selected device sheet symbol to a sheet symbol and create a new schematic sheet in the target location. The current sheet symbol is updated only. This option is disabled by default.
Additional Options
- Compile projects(s) after conversion - Enable this option to compile the project after the device sheet is converted. If you have converted sheets in your workspace, all projects in the current workspace will be compiled. This option is disabled by default.