Документация Altium Designer
...
((Dialog Reference))_AD
Dialogs((A to F))_AD
Sch_Dlg-BreakUnionFormConfirm Break Objects Union (SCH) _AD
Created: октября 27, 2017 | Updated: октября 27, 2017
| Applies to versions: 18.0, 18.1, 19.0, 19.1, 20.0, 20.1, 20.2 and 21
Вы просматриваете версию 19.0. Для самой новой информации, перейдите на страницу Sch_Dlg-BreakUnionForm((Confirm Break Objects Union (SCH) ))_AD для версии 22
The Confirm Break Objects Union dialog
Summary
The Confirm Break Object Union dialog provides controls to remove objects from, or keep objects in, a Union.
Access
The dialog can be accessed in the following ways:
- Right-click on any object that has been added to a Union then select Unions » Break Objects from Union from the context menu.
- From the main menu, select Tools » Convert » Break objects from Union then click on the object to be removed from a Union.
Options/Controls
Choose Objects to Keep or Remove from Union
- Object Kind - shows the object type, e.g., Net Label, Bus, Hyperlink, etc.
- Description - shows the description of the objects, e.g., height/width, designator, etc.
- Keep in Union - enable to mark an object(s) for removal from the Union.
- All On - click to mark all objects for removal from the Union.
- All Off - click to deselect all objects.