Working with the Nets to Ignore Design Rule on a PCB in Altium Designer
Created: октября 10, 2017 | Updated: сентября 26, 2019
| Applies to versions: 18.0, 18.1, 19.0, 19.1, 20.0, 20.1 and 20.2
Вы просматриваете версию 20.0. Для самой новой информации, перейдите на страницу Working with the Nets to Ignore Design Rule on a PCB in Altium Designer для версии 21
Rule category: Placement
Rule classification: Unary
Summary
This rule specifies which nets should be ignored.
Constraints
None, the rule applies to all nets targeted by the scope (Full Query).
How Duplicate Rule Contentions are Resolved
Contentions are not possible.
Rule Application
Not currently observed by the DRC tool.