PCB_Dlg-MoveRoom_AskUserDlgRoom containing No Net - Locked Objects_AD

Вы просматриваете версию 16.0. Для самой новой информации, перейдите на страницу PCB_Dlg-MoveRoom_AskUserDlg((Room containing No Net - Locked Objects))_AD для версии 22

The Room containing No Net / Locked Objects dialog.
The Room containing No Net / Locked Objects dialog.

Summary

When moving a room, this dialog allows designers to confirm which objects attached to that room they would like moved as well.

Access

This dialog can be accessed in the following ways:

  • From the toolbar select Design » Rooms » Move Room and click on a room.
  • Right-click on a room in the workspace and select Room Actions » Move Room from the context menu.
For this dialog to appear, the Ask When Moving Rooms Containing No Net/Locked Objects option must be enabled in the PCB Editor - General page of the Preferences dialog.

Options/Controls

  • No Net Objects - Enable to move No Net Objects with the room.
  • Locked Objects - Enable to move Locked Objects with
     
  • Don't Ask Me About Moving Room's Locked/No Net Objects Until Next PCB Session (Use Currently Selected Settings) - Enable this option to save the selected settings and continue using them for the rest of your PCB session. The dialog will not open again unless a new session is started.

 

If you find an issue, select the text/image and pressCtrl + Enterto send us your feedback.
Примечание

Набор доступных функций зависит от вашего уровня доступа к продуктам Altium. Ознакомьтесь с функциями, включенными в различные уровни Подписки на ПО Altium, и функциональными возможностями приложений, предоставляемых платформой Altium 365.

Если вы не видите в своем ПО функцию, описанную здесь, свяжитесь с отделом продаж Altium, чтобы узнать больше.