PCB_Dlg-LayerFormEdit Layer_AD
Created: апреля 20, 2018 | Updated: апреля 20, 2018
| Applies to version: 18.1
Вы просматриваете версию 18.1. Для самой новой информации, перейдите на страницу PCB_Dlg-LayerForm((Edit Layer))_AD для версии 22
The Edit Layer dialog
Summary
This dialog allows you to edit the layer name and copper thickness.
Access
In the PCB editor, double-click on a layer tab at the bottom of the workspace.
Options/Controls
- Name - Create or edit the layer's name in this field.
- Copper thickness - Enter copper thickness for the layer in this field. Use the Ctrl+Q hotkey to switch between unit measurements (
mm
ormil
).
When an internal plane is selected, the dialog include the following options:
- Name - Create or edit the internal plane's name in this field.
- Copper thickness - Enter copper thickness for the internal plane in this field. Use the Ctrl+Q hotkey to switch between unit measurements (
mm
ormil
). - Net name - Choose a net from drop-down list to assign to the internal plane.
- Pullback - Enter the pullback value for the internal plane.