Документация Altium Designer
...
((Dialog Reference))_AD
Dialogs((M to R))_AD
PCB_Dlg-EditMechLayerPairMechanical Layer Pair_AD
Created: августа 16, 2017 | Updated: августа 16, 2017
| Applies to version: 17.1
Вы просматриваете версию 23. Для самой новой информации, перейдите на страницу PCB_Dlg-EditMechLayerPair((Mechanical Layer Pair))_AD для версии 17.1
The Mechanical Layer Pair dialog.
Summary
This dialog allows the designer to configure a mechanical layer pair for the board, in terms of first and second layers. Paired mechanical layers are used when extra detail is needed in the component footprint, and that detail needs to change to another layer when the component is moved from the top side of the board, to the bottom side. An example of this is glue dot information.
Access
The dialog is accessed from the PCB Editor, or PCB Library Editor through the Mechanical Layer Pairs dialog in the following ways:
- Clicking the Add button.
- Selecting a currently defined mechanical layer pair and clicking the Mechanical Pair Properties button.
Options/Controls
- Mechanical Layer Pair - the following fields collectively define the mechanical layer pair:
- Layer 1 - the first layer in the pair. Choose from any of the currently defined and enabled mechanical layers for the board.
- Layer 2 - the second layer in the pair. Choose from any of the currently defined and enabled mechanical layers for the board.