PCB_Dlg-ComponentRuleCheckComponent Rule Check_AD

Вы просматриваете версию 17.1. Для самой новой информации, перейдите на страницу PCB_Dlg-ComponentRuleCheck((Component Rule Check))_AD для версии 21


The Component Rule Check Dialog.

Summary

This dialog allows the designer to specify rules to check a component which is currently active in the PCB library.

Access

From the PCB Library Editor, select Reports » Component Rule Check from the toolbar to access this dialog.

Options/Controls

Duplicate

  • Pads - Enable this option to check for components with duplicate pads.
  • Primitives - Enable this option to check for components with duplicate primitives.
  • Footprints - Enable this option to check for components with duplicate footprints.

Constraints

  • Missing Pad Names - Enable this option to check for components with missing pad names.
  • Mirrored Component - Enable this option to check for components that are mirrored.
  • Offset Component Reference -  Enable this option to check for components with the component reference offset.
  • Shorted Copper - Enable this option to check for components with shorted copper.
  • Unconnected Copper - Enable this option to check for components with unconnected copper.
  • Check All Components -  Enable this option to check all components in the library.

After clicking the OK button a Component Rule Check Report with the extension ERR will be generated, listing the violations based on the options you have enabled.

If you find an issue, select the text/image and pressCtrl + Enterto send us your feedback.
Примечание

Набор доступных функций зависит от вашего уровня доступа к продуктам Altium. Ознакомьтесь с функциями, включенными в различные уровни Подписки на ПО Altium, и функциональными возможностями приложений, предоставляемых платформой Altium 365.

Если вы не видите в своем ПО функцию, описанную здесь, свяжитесь с отделом продаж Altium, чтобы узнать больше.