MultiBoardAssembly_Cmd-ZoomToFitZoomToFit_AD

Created: мая 23, 2019 | Updated: мая 23, 2019 | Applies to versions: 19.0, 19.1, 20.0, 20.1 and 20.2

Вы просматриваете версию 19.0. Для самой новой информации, перейдите на страницу MultiBoardAssembly_Cmd-ZoomToFit((ZoomToFit))_AD для версии 21

Parent page: MultiBoardAssembly Commands

The following pre-packaged resources, derived from this base command, are available:

Fit All Objects

Applied Parameters: Action=Scene

Summary

This command is used to display all parts in the active Multi-board Assembly document (*.MbaDoc), within the main design window.

For a high-level look at multi-board design within Altium Designer, see Designing Systems with Multiple Boards.

Access

This command can be accessed from the Multi-board Assembly Editor by:

Choosing the View » Fit All Objects command from the main menus.
Using the Ctrl+PgDn keyboard shortcut.

Use

After launching the command, the view in the main design window will change to present all parts in the assembly, centered within the workspace.

Fit Selection

Applied Parameters: Action=Selection

Summary

This command is used to display all currently selected parts in the active Multi-board Assembly document (*.MbaDoc), within the main design window.

For a high-level look at multi-board design within Altium Designer, see Designing Systems with Multiple Boards.

Access

With at least one part (assembly, board, or body) selected in the workspace, this command can be accessed from the Multi-board Assembly Editor by:

Choosing the View » Fit Selection command from the main menus.
Using the Shift+Ctrl+PgDn keyboard shortcut.

Use

After launching the command, the view in the main design window will change to present all selected parts in the assembly, zoomed and centered (where possible) within the workspace.

Версия для печати

If you find an issue, select the text/image and pressCtrl + Enterto send us your feedback.

Примечание

Набор доступных функций зависит от вашего уровня доступа к продуктам Altium. Ознакомьтесь с функциями, включенными в различные уровни Подписки на ПО Altium, и функциональными возможностями приложений, предоставляемых платформой Altium 365.

Если вы не видите в своем ПО функцию, описанную здесь, свяжитесь с отделом продаж Altium, чтобы узнать больше.

MultiBoardAssembly_Cmd-ZoomToFitZoomToFit_AD

Summary

Access

Use

Summary

Access

Use

Was this page helpful?