MultiBoardAssembly_Cmd-ObjectVisibilityObjectVisibility_AD

Created: ноября 30, 2018 | Updated: декабря 12, 2018 | Applies to versions: 19.0, 19.1, 20.0, 20.1 and 20.2

Вы просматриваете версию 20.2. Для самой новой информации, перейдите на страницу MultiBoardAssembly_Cmd-ObjectVisibility((ObjectVisibility))_AD для версии 21

Parent page: MultiBoardAssembly Commands

The following pre-packaged resource, derived from this base command, is available:

Toggle Object Visibility in Panel

Applied Parameters: Scope=TreeViewSelected

Summary

This command is used to toggle the visibility of the selected part(s) - PCBs, Components, and 3D STEP models (enclosure/case) - in the active Multi-board Assembly document (*.MbaDoc).

For a high-level look at multi-board design within Altium Designer, see Designing Systems with Multiple Boards.

Access

This command can be accessed from the Multi-board Assembly Editor in the following way:

With the required part(s) selected in the Multiboard Assembly panel, right-click and choose the Visible command from the context menu.

The command is not available directly in the workspace for components.

Use

Ensure that the part(s) is selected in the the Multiboard Assembly panel. After launching the command, the visibility of the selected part(s) will be toggled off and on in the editor.

Toggle Object Visibility in Workspace

Applied Parameters: Scope=SceneSelected

Summary

This command is used to toggle the visibility of the selected part(s) - PCBs, Components, and 3D STEP models (enclosure/case) - in the active Multi-board Assembly document (*.MbaDoc).

For a high-level look at multi-board design within Altium Designer, see Designing Systems with Multiple Boards.

Access

This command can be accessed from the Multi-board Assembly Editor in the following way:

With the required part(s) selected in the workspace, right-click and choose the Visible command from the context menu.

Use

Ensure that the part(s) is selected in the workspace. After launching the command, the visibility of the selected part(s) will be toggled off and on in the editor.

Версия для печати

If you find an issue, select the text/image and pressCtrl + Enterto send us your feedback.

Примечание

Набор доступных функций зависит от вашего уровня доступа к продуктам Altium. Ознакомьтесь с функциями, включенными в различные уровни Подписки на ПО Altium, и функциональными возможностями приложений, предоставляемых платформой Altium 365.

Если вы не видите в своем ПО функцию, описанную здесь, свяжитесь с отделом продаж Altium, чтобы узнать больше.

MultiBoardAssembly_Cmd-ObjectVisibilityObjectVisibility_AD

Summary

Access

Use

Summary

Access

Was this page helpful?