LayerStackManager_Cmd-UndoUndo_AD

Created: октября 14, 2022 | Updated: октября 14, 2022 | Applies to version: 21

This document is no longer available beyond version 21. Information can now be found here: Defining the Layer Stack for version 25

Parent page: LayerStackManager Commands

The following pre-packaged resource, derived from this base command, is available:

Undo

Applied Parameters: None

Summary

This feature is used to restore the active Layer Stack to its state previous to the last operation. Multiple levels of undo are supported.

Access

This command can be accessed from the Layer Stack by:

Choosing the Edit » Undo command from the main menus.
Clicking the button on the Quick Access bar.
Using the Ctrl+Z keyboard shortcut.

The command only becomes available provided a change to the Layer Stack has been made.

Use

After launching the command, the last operation will be 'undone' and the Layer Stack will be returned to its previous state. Use the command repeatedly to undo previous operations.

Tips

A command that has been 'undone' using this command can be 'redone' using the Redo command.

Версия для печати

If you find an issue, select the text/image and pressCtrl + Enterto send us your feedback.

Примечание

Набор доступных функций зависит от вашего уровня доступа к продуктам Altium. Ознакомьтесь с функциями, включенными в различные уровни Подписки на ПО Altium, и функциональными возможностями приложений, предоставляемых платформой Altium 365.

Если вы не видите в своем ПО функцию, описанную здесь, свяжитесь с отделом продаж Altium, чтобы узнать больше.

LayerStackManager_Cmd-UndoUndo_AD

Summary

Access

Tips

Was this page helpful?