Zuken CR5000 Design Files
The Zuken CR-5000 Importer requires ASCII files, therefore, you will need to convert your Zuken CR-5000 binary files to ASCII before using the Import Wizard.
Converting Zuken binary files to ASCII format requires a special license from Zuken.
Use the following steps to convert your Zuken CR-5000 binary PCB database files to ASCII files:
-
Convert the binary file
<basename>.ftp into an ASCII file: In the cdb directory, extract <basename>.ftf using the DOS (or command script) command: ftout.exe<basename>. For example C:\cr5000\bin\ftout.exe basename.
-
Convert the binary file
<jobname>.pcb into an ASCII file: In the pcb directory, extract <jobname>.pcf using the DOS (or command script) command: pcout.exe<jobname>. For example: C:\cr5000\bin\pcout.exe jobname.
To convert the Zuken CR-5000 schematic binary file (*.sht) to ASCII format (*.eds), run the Zuken editWriter.exe utility. This opens a GUI for creating the ASCII format file.
The Zuken CR-5000 Importer requires two ASCII files to import a Zuken CR-5000 PCB design and an ASCII schematic file to import a schematic:
-
An ASCII layout file which contains placement and layer symbols, layer count, units, etc. (
*.pcf)
-
An ASCII representation of the footprints used in the design (library) (
*.ftf)
-
An ASCII representation of the schematic (
*.eds, *.edf)
-
An ASCII representation of the symbol (
*.laf, *.smb)
-
An ASCII representation of the symbol (
*.prf)
-
An ASCII representation of the component library (
*.cdf)
Please note that if you import a PCB (.pcf) file and do not import a footprint library, or the footprint library does not provide any information about a pad, it will be imported as a through-hole with a default size and shape. Similarly, vias will not be imported correctly as well.
Select the Zuken CR-5000 Files to Import
Click Add to choose which Zuken design files to include in the process. You can delete a selected file by clicking Remove.
Select Footprint Libraries to Import
Click Add to choose which Zuken library files (*.FTF) to include in the process. You can delete a selected file by clicking Remove.
Setting the General Options
Use the General Options page to set up general log reporting options.
Under General Settings, enable the desired options: Log All Errors, Log All Warnings, and Log All Events.
Log of Analyzing
The Log of Analyzing page lists any errors/warnings found during the scanning of the Zuken files you are importing.
General Import Options
Use this page of the Wizard to review the output project structure and specify the Output Directory in which to import the files. Use the Browse Folder icon to search for and choose the Output Directory.
Setting the Schematic Import Options
This page of the Wizard is used to set the import options for your schematic. Enable the desired options.
You can edit the Power Ports names and Probes names textboxes, ensuring that each item is separated by a semi-colon.
Setting the PCB Import Options
Use this page of the Wizard to set the import options for your PCB.
You can edit Testpoint names in the textbox, ensuring that each item is separated by a semi-colon. Use the Font drop-down to select the desired font.
Current Board Layer Mapping
This page of the Wizard shows the board layer mapping. Information displayed includes Sort Key, Zuken Layer, and its associated Altium Designer Layer. Pink highlighting in the Altium Designer Layer denotes that the corresponding Zuken Layer will not be imported.
If desired, you can edit the layer mapping for any or all layers. You can rearrange the columns by dragging a column header into the desired position. Click on the header of any column to access 
or 
then click to sort that column in ascending or descending order, respectively.
When you hover over the column heading, a filter icon ( 
) appears. Click to open a drop-down from where you can select your filter choices for that column. Choices include:
Right-click within the grid area to access commands for saving the current board layer mapping to a Zuken board layer map file (.MAP) file or for loading mapping from a .MAP file.
Current Footprints Layer Mapping
This page of the Wizard shows the footprints layer mapping. Information displayed includes Sort Key, Zuken Layer, and its associated Altium Designer Layer. Pink highlighting in the Altium Designer Layer denotes that the corresponding Zuken Layer will not be imported.
If desired, you can edit the layer mapping for any or all layers. You can rearrange the columns by dragging a column header into the desired position. Click on the header of any column to access or then click to sort that column in ascending or descending order, respectively.
When you hover over the column heading, a filter icon ( ) appears. Click to open a drop-down from where you can select your filter choices for that column. Choices include:
Right-click within the grid area to access commands for saving the current footprint layer mapping to a Zuken footprint layer map file (.MAP) file or for loading mapping from a .MAP file.
Importing Progress
On this page of the Wizard, a green progress bar shows the progress of the import process while also listing each file at the process continues.
Closing the Wizard
The Zuken CR5000 Import Wizard has completed. The Messages panel appears with any relevant messages. Click Finish to close the Wizard.
The files will be grouped into an Altium Designer PCB project (*.PrjPcb) that is automatically created and available in the Projects panel.
Zuken CR5000 files translate as follows:
-
Zuken CR5000 ASCII PCB Layout (
*.pcf) files translate to Altium Designer PCB files (*.PcbDoc).
-
Zuken CR5000 ASCII representation of the footprints files (
*.ftf) translate into Altium Designer PCB library files (*.PcbLib).
-
Zuken CR5000 ASCII representation of the schematic files (
*.eds) translate to Altium Designer schematic files (*.SchDoc) and schematic library files (*.SchLib).
-
Zuken CR5000 ASCII representation of the symbol files (
*.prf) translate to schematic library files (*.SchLib).
-
Zuken CR5000 ASCII representation of the component library files (
*.cdf) translate to schematic library files (*.SchLib).
-
If any warnings were generated during the import process, a
*.LOG file is created showing the warnings.
Документация Altium Designer
...
Advanced Design Environment Topics in Altium Designer
Взаимодействие с другими системами проектирования