Документация Altium Designer
...
((Dialog Reference))_AD
Dialogs((A to F))_AD
ActiveBOM_Dlg-AddItemInstanceDialogAdd to BOM Components_AD
Created: сентября 04, 2017 | Updated: января 26, 2019
| Applies to versions: 18.0, 18.1, 19.0, 19.1, 20.0, 20.1 and 20.2
Вы просматриваете версию 18.0. Для самой новой информации, перейдите на страницу ActiveBOM_Dlg-AddItemInstanceDialog((Add to BOM Components))_AD для версии 21
The Add to BOM Components dialog
Summary
The Add to BOM Components dialog is used to define the number of instances of a component in an ActiveBOM. Active BOM supports adding additional managed (server) and unmanaged (library) components into the BOM. This is a two-step process; first the component is added into the BOM then the number of instances is defined. The remainder of the new item's parameters are edited directly in the BOM Items grid.
Access
After adding a new server or Custom Item (by clicking the Add new button in the ActiveBOM document then selecting the item type to add), right-click on the new item then select the Add instances of [<ItemDetails>] command.
Options/Controls
- Designator prefix - enter the prefix to be used for the designator of the additional instance(s).
- Separator - if required, a designator separator can be defined to give results such as X-1, or X:1.
- Quantity - enter the number of components required. This value is used to define the designator range and will also appear in the ActiveBOM Quantity column.