KB: Share my MCAD CoDesigner changes with other Mechanical Engineers
Created: 11月 11, 2024 | Updated: 11月 20, 2024
Altium Designer
Starting in version: 20.1
Up to Current
CoDesigner is not a storage system for synchronizing changes among Mechanical Engineers (MEs)
Solution Details
The exchange is directional. The data sent from EE to ME is handled by CoDesigner separately from the data sent from ME to Electrical Engineer (EE). In other words, CoDesigner is a tool for sending changes from EE to ME and back, it's not a storage system and not a tool for interacting between MEs.To allow other MEs to see your changes, please simply save your PCB assembly to some common storage available for both, in the same way as you would for any other assembly. Or, pull changes on ECAD side and then push an updated design back to all MCADs.
Here's documentation with recommendations for the Mechanical Engineer that goes into more detail:
https://www.altium.com/documentation/altium-designer/direct-ecad-mcad-design-with-altium-codesigner-ad#!recommendations-for-the-mechanical-engineer