WorkspaceManager_Err-UndesignatedPartsRequiringAnnotationUndesignated Parts Requiring Annotation_AD

現在、バージョン 15.1. をご覧頂いています。最新情報については、バージョン WorkspaceManager_Err-UndesignatedPartsRequiringAnnotation((Undesignated Parts Requiring Annotation))_AD の 21 をご覧ください。
 

Parent category: Violations Associated with Components

Default report mode:

Summary

This violation occurs when a component in the design is found to have a default designator (with a ? suffix) - either it has yet to be annotated or the designator has been reset.

Notification

If compiler errors and warnings are enabled for display on the schematic (enabled on the Schematic - Compiler page of the Preferences dialog) an offending object will display a colored squiggle beneath it. A notification is also displayed in the Messages panel in the following format:

Un-Designated Part <PartDesignator>

where

  • PartDesignator is the default designator for the un-designated part (e.g. U?, D?, C?, etc).

Recommendation for Resolution

Assign a unique designator to the offending component as required. This can be done manually, by editing the designator, or through use of the Annotate dialog (Tools » Annotate Schematics).

Alternatively, use the Tools » Annotate Schematics Quietly command, to annotate without launching the Annotate dialog.

Tips

  1. Only one error instance will be listed in the Messages panel for each distinct designator type (U?, D?, C?, etc). Multiple errors may exist.

 

If you find an issue, select the text/image and pressCtrl + Enterto send us your feedback.
注記

利用できる機能は、Altium 製品のアクセスレベルによって異なります。Altium Designer ソフトウェア サブスクリプション の様々なレベルに含まれる機能と、Altium 365 プラットフォーム で提供されるアプリケーションを通じて提供される機能を比較してください。

ソフトウェアの機能が見つからない場合は、Altium の営業担当者に連絡して 詳細を確認してください。

Content