WorkspaceManager_Err-FloatingNetLabelsFloating Net Labels_AD

現在、バージョン 16.1. をご覧頂いています。最新情報については、バージョン WorkspaceManager_Err-FloatingNetLabels((Floating Net Labels))_AD の 21 をご覧ください。
 

Parent category: Violations Associated with Nets

Default report mode:

Summary

This violation occurs when a net label has been detected to be floating - not attached to a wire or bus object - within the design. The message will also appear for a bus power port object that is not electrically connected to the rest of the circuit.

Notification

If compiler errors and warnings are enabled for display on the schematic (enabled on the Schematic - Compiler page of the Preferences dialog) an offending object will display a colored squiggle beneath it. A notification is also displayed in the Messages panel in the following format:

Floating Net Label <NetLabelName>

where:

  • NetLabelName is the name of the offending net label.

Recommendation for Resolution

Ensure that the offending net label object is connected to the required wire or bus object. If the net label is redundant, simply delete it from the design.

Check also that the wire/bus object and associated net label are on grid. An object can be moved back onto grid manually, or by using the Edit » Align » Align To Grid command.

Also check that a wire is really a wire and not a line object!

 

If you find an issue, select the text/image and pressCtrl + Enterto send us your feedback.
注記

利用できる機能は、Altium 製品のアクセスレベルによって異なります。Altium Designer ソフトウェア サブスクリプション の様々なレベルに含まれる機能と、Altium 365 プラットフォーム で提供されるアプリケーションを通じて提供される機能を比較してください。

ソフトウェアの機能が見つからない場合は、Altium の営業担当者に連絡して 詳細を確認してください。

Content