WorkspaceManager_Dlg-LineNumberingLine Numbering_AD

Created: 5月 29, 2019 | Updated: 12月 11, 2020 | Applies to versions: 19.0, 19.1, 20.0, 20.1, 20.2 and 21

現在、バージョン 20.0. をご覧頂いています。最新情報については、バージョン WorkspaceManager_Dlg-LineNumbering((Line Numbering))_AD の 22 をご覧ください。

LineNumbering dlg_RenumberAll

Three variations of the Line numbering dialog

Summary

The Line numbering dialog is used to select the action required when numbering the Line# column in an ActiveBOM document (*BomDoc).

Refer to the Line # Options dialog is used to configure the numbering start value and increment.

The dialog is accessed from an ActiveBOM document (*BomDoc) by clicking the ActiveBON Line numbering button button.

This variation of the dialog opens when ALL Line# cells in an ActiveBOM document (*BomDoc) are empty.

Set Line numbers for selected rows - click to use the existing numbers as references and continuously number the SELECTED empty cells, starting with the nearest non-empty cells above.
Set Line numbers for all rows - click to use the existing numbers as references and continuously number ALL empty cells, starting with the nearest non-empty cells above.

This variation of the dialog opens when SOME of the line numbers in an ActiveBOM document (*BomDoc) have already been defined.

Continue numbering - click to use the existing numbers as references and continuously number empty cells starting from the nearest non-empty cells above.
Renumber all - click to delete all existing numbers and renumber all rows.

LineNumbering dialog_ Renumber All

This variation of the dialog opens when ALL of the line numbers in an ActiveBOM document (*BomDoc) have already been defined.

If you find an issue, select the text/image and pressCtrl + Enterto send us your feedback.

注記

利用できる機能は、Altium 製品のアクセスレベルによって異なります。Altium Designer ソフトウェアサブスクリプションの様々なレベルに含まれる機能と、Altium 365 プラットフォームで提供されるアプリケーションを通じて提供される機能を比較してください。

ソフトウェアの機能が見つからない場合は、Altium の営業担当者に連絡して詳細を確認してください。