SystemDesigner_Cmd-RedoRedo_AD

Created: 2月 06, 2023 | Updated: 2月 06, 2023 | Applies to version: 21

This document is no longer available beyond version 21. Information can now be found here: Multi-board Schematic Editor General Editing Shortcuts for version 25

注記

利用できる機能は、Altium 製品のアクセスレベルによって異なります。Altium Designer ソフトウェアサブスクリプションの様々なレベルに含まれる機能と、Altium 365 プラットフォームで提供されるアプリケーションを通じて提供される機能を比較してください。

ソフトウェアの機能が見つからない場合は、Altium の営業担当者に連絡して詳細を確認してください。

Parent page: SystemDesigner Commands

The following pre-packaged resource, derived from this base command, is available:

Redo

Copy Link Copied

Applied Parameters: None

Summary

This feature is used to restore changes made by the Undo feature, in the active Multi-board Schematic document (*.MbsDoc). Multiple levels of redo are supported.

For a high-level look at multi-board design within Altium Designer, see Designing Systems with Multiple Boards.

Access

This command can be accessed from the Multi-board Schematic Editor by:

Choosing the Edit » Redo command from the main menus.
Clicking the button on the Quick Access Bar.
Using the Ctrl+Y keyboard shortcut.

The command only becomes available provided the Undo command has been used.

Use

After launching the command, the last command to be undone by the Undo operation will be 'redone', and the document will be returned to its state prior to the last Undo taking place. Use the command repeatedly to redo previously undone operations.

If you find an issue, select the text/image and pressCtrl + Enterto send us your feedback.

印刷用ページ

注記

ソフトウェアの機能が見つからない場合は、Altium の営業担当者に連絡して詳細を確認してください。

SystemDesigner_Cmd-RedoRedo_AD

Summary

Access

Use

Was this page helpful?