Configuring Schematic Blanket Object Properties in Altium Designer
Created: 4月 08, 2021 | Updated: 8月 23, 2021
| Applies to version: 21
This document is no longer available beyond version 21. Information can now be found here: Blanket Properties for version 25
Parent page: Blanket
Schematic Editor object properties are definable options that specify the visual style, content and behavior of the placed object. The property settings for each type of object are defined in two different ways:
- Pre-placement settings – most Blanket object properties, or those that can logically be pre-defined, are available as editable default settings on the Schematic - Defaults page of the Preferences dialog (access from the
button at the top-right of the design space). Select the object in the Primitive List to reveal its options on the right.
- Post-placement settings – all Blanket object properties are available for editing in the Blanket dialog and the Properties panel when a placed Blanket is selected in the design space.
Properties
- Border Width - use the drop-down to select the desired border width.
- Line Style - use the drop-down to select the desired line style.
- Border Color - click the color box to select the desired color for the border.
- Fill Color - click the color box to select the desired color for the fill.
- Collapsed and Disabled - check to collapse and disable blankets.