Configuring PCB Track Keepout Object Properties in Altium Designer
Created: 4月 19, 2022 | Updated: 4月 20, 2022
| Applies to version: 21
現在、バージョン 22.0. をご覧頂いています。最新情報については、バージョン Configuring PCB Track Keepout Object Properties in Altium Designer の 21 をご覧ください。
Parent page: Track Keepout
PCB Editor object properties are definable options that specify the visual style, content and behavior of the placed object. The property settings for each type of object are defined in two different ways:
- Pre-placement settings – most Track Keepout object properties, or those that can logically be pre-defined, are available as editable default settings on the PCB Editor - Defaults page of the Preferences dialog (accessed from the button at the top-right of the design space). Select the object in the Primitive List to reveal its options on the right.
- Post-placement settings – all Track Keepout object properties are available for editing in the Properties panel when a placed Track Keepout is selected in the design space.
Location (Properties panel only)
- (X/Y)
- X (first field) - the current X (horizontal) coordinate of the reference point of the track keepout relative to the current origin. Edit to change the X position of the track keepout. The value can be entered in either metric or imperial; include the units when entering a value whose units are not the current default.
- Y (second field) - The current Y (vertical) coordinate of the reference point of the track keepout relative to the current origin. Edit to change the Y position of the track keepout. The value can be entered in either metric or imperial; include the units when entering a value whose units are not the current default.
Properties
- Restricted for Layer - use the drop-down to select the restricted layer.
- Start (X/Y) (Properties panel only) - displays the current X/Y coordinate of the track keepout start point relative to the current origin.
- Width - displays the current width of the track keepout. Edit this field to change the track keepout width within the range 0.001mil to 10000mil.
- Length - displays the current length of the track keepout. Edit this field to change the track keepout length within the range 0.001mil to 10000mil.
- End (X/Y) (Properties panel only) - displays the current X/Y coordinate of the track keepout end point, relative to the current origin.
Keepout Restrictions
Use this region to select which object types will be restricted by the Keepout. Deselecting an object type will cause the Keepout to allow transgressions by that type of object (not kept out) by not imposing the applicable Clearance Rule. Choices include:
- Via
- Track
- Copper
- SMD Pad
- TH Pad