Working with the SMD To Corner Design Rule on a PCB in Altium Designer

現在、バージョン 19.1. をご覧頂いています。最新情報については、バージョン Working with the SMD To Corner Design Rule on a PCB in Altium Designer の 21 をご覧ください。
 

Rule category: SMT

Rule classification: Unary

Summary

This rule specifies the minimum distance from the edge of a surface mount pad to the first routing corner.

All design rules are created and managed within the PCB Rules and Constraints Editor dialog. For a high-level view of working with the design rules system, see Constraining the Design - Design Rules. For detailed information regarding how to target the objects that you want a design rule to apply to, see Scoping Design Rules.

Constraints

Default constraints for the SMD To Corner rule.Default constraints for the SMD To Corner rule.

  • Distance - the value for the minimum permissible distance from the SMD pad edge to the start of the first routing corner.

How Duplicate Rule Contentions are Resolved

All rules are resolved by the priority setting. The system goes through the rules from highest to lowest priority and picks the first one whose scope expression matches the object(s) being checked.

Rule Application

Online DRC and Batch DRC, as well as the interactive router. The interactive router will obey this rule by maintaining a straight pad exit trace emanating from the pad center on any allowed "entry angle" (see SMD Entry rule), at least to the distance specified.

The SMD to Corner rule defines the distance to the first corner. Use the SMD Entry rule to specify where the route is allowed to enter
(or exit) the SMD pad.

 

If you find an issue, select the text/image and pressCtrl + Enterto send us your feedback.
注記

利用できる機能は、Altium 製品のアクセスレベルによって異なります。Altium Designer ソフトウェア サブスクリプション の様々なレベルに含まれる機能と、Altium 365 プラットフォーム で提供されるアプリケーションを通じて提供される機能を比較してください。

ソフトウェアの機能が見つからない場合は、Altium の営業担当者に連絡して 詳細を確認してください。

Content