Search In: Doc:Documentation: Altium Designer
Altium DesignerAltium 365Altium MCAD CoDesignerAltium CircuitMakerCompany DashboardAltium On-Prem Enterprise ServerAltium Infrastructure Server
Ver: Version: 21
2120.220.120.019.119.018.118.017.117.016.116.015.1
Close
検索 Search on Documentation

Working with the Power Plane Clearance Design Rule on a PCB in Altium Designer

Created: 3月 17, 2022 | Updated: 3月 18, 2022 | Applies to version: 21

This document is no longer available beyond version 21. Information can now be found here: Power Plane Clearance Rule for version 25

 

Rule category: Plane

Rule classification: Unary

Summary

This rule specifies the radial clearance created around vias and pads that pass through but are not connected to a power plane.

In PCB design, this clearance is also referred to as an antipad (or anti-pad).
All design rules are created and managed within the PCB Rules and Constraints Editor dialog. For a high-level view of working with the design rules system, see Defining, Scoping & Managing PCB Design Rules.

Constraints

Default constraints for the Power Plane Clearance Rule.Default constraints for the Power Plane Clearance Rule.

  • Clearance - the value for the radial clearance.

How Duplicate Rule Contentions are Resolved

All rules are resolved by the priority setting. The system goes through the rules from highest to lowest priority and picks the first one whose scope expression matches the object(s) being checked.

Rule Application

During output generation.

If you find an issue, select the text/image and pressCtrl + Enterto send us your feedback.
注記

利用できる機能は、Altium 製品のアクセスレベルによって異なります。Altium Designer ソフトウェア サブスクリプション の様々なレベルに含まれる機能と、Altium 365 プラットフォーム で提供されるアプリケーションを通じて提供される機能を比較してください。

ソフトウェアの機能が見つからない場合は、Altium の営業担当者に連絡して 詳細を確認してください。

Content