Search In: Doc:Documentation: Altium Designer
Altium DesignerAltium 365Altium MCAD CoDesignerAltium CircuitMakerCompany DashboardAltium On-Prem Enterprise ServerAltium Infrastructure Server
Ver: Version: 18.0
2120.220.120.019.119.018.118.017.117.016.116.015.1
Close
検索 Search on Documentation

Working with the Layer Pairs Design Rule on a PCB in Altium Designer

Created: 3月 23, 2017 | Updated: 9月 26, 2019 | Applies to versions: 18.0, 18.1, 19.0, 19.1, 20.0, 20.1 and 20.2
現在、バージョン 18.0. をご覧頂いています。最新情報については、バージョン Working with the Layer Pairs Design Rule on a PCB in Altium Designer の 21 をご覧ください。
 

Rule category: Manufacturing

Rule classification: Unary

Summary

This rule checks to ensure that the used drill-pairs match the currently defined drill-pairs. The used drill-pairs are determined from the vias and pads found in the board. The permissable drill-pairs are defined in the Drill-Pair Manager dialog.

All design rules are created and managed within the PCB Rules and Constraints Editor dialog. For a high-level view of working with the design rules system, see Constraining the Design - Design Rules. For detailed information regarding how to target the objects that you want a design rule to apply to, see Scoping Design Rules.

Constraints

Default constraint for the Layer Pairs rule.Default constraint for the Layer Pairs rule.

  • Enforce layer pairs settings - specifies whether the check is made or not.

How Duplicate Rule Contentions are Resolved

All rules are resolved by the priority setting. The system goes through the rules from highest to lowest priority and picks the first one whose scope expression matches the object(s) being checked.

Rule Application

Online DRC, Batch DRC, and during interactive routing.

If you find an issue, select the text/image and pressCtrl + Enterto send us your feedback.
注記

利用できる機能は、Altium 製品のアクセスレベルによって異なります。Altium Designer ソフトウェア サブスクリプション の様々なレベルに含まれる機能と、Altium 365 プラットフォーム で提供されるアプリケーションを通じて提供される機能を比較してください。

ソフトウェアの機能が見つからない場合は、Altium の営業担当者に連絡して 詳細を確認してください。

Content