Search In: Doc:Documentation: Altium Designer
Altium DesignerAltium 365Altium MCAD CoDesignerAltium CircuitMakerCompany DashboardAltium On-Prem Enterprise ServerAltium Infrastructure Server
Ver: Version: 20.0
2120.220.120.019.119.018.118.017.117.016.116.015.1
Close
検索 Search on Documentation

Working with the Hole To Hole Clearance Design Rule on a PCB in Altium Designer

Created: 3月 23, 2017 | Updated: 9月 26, 2019 | Applies to versions: 18.0, 18.1, 19.0, 19.1, 20.0, 20.1 and 20.2
現在、バージョン 20.0. をご覧頂いています。最新情報については、バージョン Working with the Hole To Hole Clearance Design Rule on a PCB in Altium Designer の 21 をご覧ください。
 

Rule category: Manufacturing

Rule classification: Binary

Summary

This rule ensures checking of manufacturing compatibility of drilled holes. When enabled, it will flag any multiple vias / pads at the same location, or overlapping pad / via holes. There is also an option to determine whether stacked micro vias are allowed or not.

All design rules are created and managed within the PCB Rules and Constraints Editor dialog. For a high-level view of working with the design rules system, see Defining, Scoping & Managing PCB Design Rules.

Constraints

Default constraints for the Hole To Hole Clearance rule.Default constraints for the Hole To Hole Clearance rule.

  • Allow Stacked Micro Vias - enable this option to allow micro vias to be stacked. 
There are many advantages of using micro vias:
  • Such a via requires a much smaller pad, which helps to reduce the board size and weight.
  • They allow IC components to be more densely placed. This could result in the use of a smaller PCB, which would bring a welcome reduction in total board manufacturing costs.
  • They facilitate improved electrical performance, due to shorter pathways.
  • Hole To Hole Clearance - the value for the minimum permissible clearance between pad/via holes in the design.

How Duplicate Rule Contentions are Resolved

All rules are resolved by the priority setting. The system goes through the rules from highest to lowest priority and picks the first one whose scope expressions match the object(s) being checked.

Rule Application

Online DRC and Batch DRC.

If you find an issue, select the text/image and pressCtrl + Enterto send us your feedback.
注記

利用できる機能は、Altium 製品のアクセスレベルによって異なります。Altium Designer ソフトウェア サブスクリプション の様々なレベルに含まれる機能と、Altium 365 プラットフォーム で提供されるアプリケーションを通じて提供される機能を比較してください。

ソフトウェアの機能が見つからない場合は、Altium の営業担当者に連絡して 詳細を確認してください。

Content