Altium Designer Home
...
((Dialog Reference))_AD
Dialogs((M to R))_AD
PCB_Dlg-LayersTransparencyFormObject Visibility_AD
Created: 11月 08, 2019 | Updated: 12月 07, 2020
| Applies to versions: 20.0, 20.1, 20.2 and 21
現在、バージョン 18.0. をご覧頂いています。最新情報については、バージョン PCB_Dlg-LayersTransparencyForm((Object Visibility))_AD の 22 をご覧ください。
The Object Visibility dialog
Summary
The Object Visibility dialog is used to set a common transparency level for a particular object across different layers and set different transparencies for different objects on a specific layer.
Access
From the PCB/PCBLIB Editor, the Object Visibility dialog is accessed from the View Configuration panel. Switch to the panel's View Options tab, then click the Advanced button, located at the bottom-right of the Object Visibility section.
Options/Controls
Columns/Rows
- Layers - each individual layer may be selected in the left-hand margin by clicking on the desired layer. The entire row will need to be selected in order to toggle the transparency. Use the drop-down next to the layer's name to hide the layer if desired.
- Objects - each individual object will be selected by clicking on the desired object. An individual entry can be selected if you'd like to only modify the transparency of this object on a specific layer.
Transparency Controls
- Only show used layers - check this box to only display layers that have been used in the design.
- Transparency for selected - drag this bar to set the desired transparencies for the select object rows or layer columns.
- Percentage - use this box to manually type in the desired transparencies for the selected object rows or layer columns.