PCB_Cmd-ShoveComponentsShoveComponents_AD

Applied Parameters: None

Summary

This command is used to displace or 'shove' components that are overlapping or require to be aligned in a particular fashion.

Access

This command is accessed from the PCB Editor by choosing the Tools » Component Placement » Shove command, from the main menus.

Use

After launching the command, the cursor will change to a cross-hair and you will enter shove mode. Position the cursor over a component and click, or press Enter. The surrounding components will be 'shoved' a distance according to the shove depth, defined in the Shove Depth (1..1000) dialog.

Continue shoving further components, or right-click, or press Esc, to exit shove mode.

Applied Parameters: Method = SetShoveDepth

Summary

This command is used to access the Shove Depth (1..1000) dialog, from where you can specify a value to be used when shoving components.

Access

This command is accessed from the PCB Editor by choosing the Tools » Component Placement » Set Shove Depth command, from the main menus.

Use

After launching the command, the Shove Depth (1..1000) dialog appears. Use the dialog to set a value for the distance that components are 'shoved', when using the shove feature. After clicking OK, the specified depth will be persistent - available across PCB documents, and sessions of Altium Designer.