Altium Designer Home
Retired Documentation No Longer Applicable to a Later Version of Altium Designer
Retired Documentation - Miscellaneous
Altium Designer のオフライン インストール
The standard Altium Designer Installer requires an internet connection to complete the installation process. If it is not possible to run the installer from the target PC, you can install Altium Designer using an offline Installation package (commonly referred to as the Offline Installer).
Obtaining the Offline Installation Package
First, you will need to obtain the Offline Installation package. This is a zipped collection of the necessary installables (including extensions), along with the relevant Altium Designer Installer. The latter simply runs, as per the standard internet-based Installer, only getting the required files from elsewhere in the local unzipped content rather than the Altium Cloud repository.
For Altium Designer, the Offline Installer can be obtained directly from the Downloads page of the Altium website by clicking the Need Offline Installer? link.
A pop-up window will appear, prompting you to enter a reason why you need an Offline Installer. Sometimes firewalls or routers block some of the installation traffic. Using the Offline Installer usually resolves this issue, so that would be a reason, as an example.
After entering your reason, click the Submit button. A second pop-up window will confirm that your request has been received. You will be assigned a Case Number with which you can track your request through Altium's Support Center. It can take up to 48 hours for the request to be processed.
Once you receive the confirmation email, go back to the Downloads page - the link will have been replaced with a button with which you can download the installer.
For Altium NEXUS, the Offline Installer can be obtained using the applicable link in the Legacy Downloads for Altium NEXUS section of the Legacy Downloads page.
With the Offline Installer acquired, unzip to the required target PC on which you want to install Altium Designer.
Running the Installer
Browse to the location on your hard disk into which you have unzipped the offline installation package and double-click the AltiumDesigner20Setup.exe file. The Altium Designer Installer welcome page will open.
Browse to the location on your hard disk into which you have unzipped the offline installation package and double-click the AltiumNEXUS3Setup.exe file. The Altium NEXUS Installer welcome page will open.
Initial welcome page for the Altium Designer Installer.
Initial welcome page for the Altium NEXUS Installer.
The installer itself is wizard-based and provides a set of progressive and intuitive pages that collectively gather the information needed to install the software with its initial feature set as you require.
Click Next to continue. The following sections provide a summary of the various pages you will encounter.
License Agreement
This page of the Installer presents you with the Altium End-User License Agreement (EULA).
Read and accept Altium's End-User License Agreement.
Read and accept Altium's End-User License Agreement.
Before you can continue with the installation of the software, you must read through and accept the terms of this agreement. The agreement can be viewed in different languages, including English (the default), German, Chinese, and Japanese.
After reading the EULA, continue with the installation by checking the I accept the agreement box and clicking the Next button.
Installation Mode
If you have an existing installation of Altium Designer, and that installation can be updated to the new version you are trying to install now, this page of the Altium Designer Installer wizard will be available.
Install a new instance of Altium Designer, or update an existing instance.
Install a new instance of Altium NEXUS, or update an existing instance.
This page gives you the choice between:
- Installing a separate new instance of Altium Designer - use this option the first time you install Altium Designer with the Offline Installer.
- Updating an existing installation of Altium Designer - use this option when you are updating your offline installation of Altium Designer. If you are updating an existing installation, you can select the product instance being updated.
Select the required installation mode, and click Next to continue.
Select Design Functionality
This next page of the Installer allows you to specify which features are installed initially. The PCB Design option provides the base software and core technologies required to perform PCB design. It is always installed and cannot be deselected. Use the remaining options to tailor the install to suit your needs.
Enable the initial functionality you would like in your installation of Altium Designer. This can be changed later if required.
Enable the initial functionality you would like in your installation of Altium NEXUS. This can be changed later if required.
Click to enable the functionality you require. As you select and deselect functionality, text at the bottom of the page dynamically updates to reflect the space required for installation. Note that the figure given for the amount of downloaded data does not apply to the Offline Installer.
Remember, no matter what decision you take during initial installation, you can add or remove features and functionality at any stage after installation. This puts you in the driver's seat to fully customize your installation in-line with your possibly ever-changing design needs.
After defining what functionality you would like, click Next to proceed.
Destination Folders
This next page of the Installer allows you to specify the destination folders for the install, in terms of both the Program Files for the software and the Shared Documents that are accessed and used by the software.
Specify where the software and associated documents are to be installed.
Specify where the software and associated documents are to be installed.
These locations become especially important when installing multiple instances of Altium Designer. If one or both of these destinations is not currently an empty folder (i.e. devoid of content) you will be prevented from proceeding with the installation until you specify alternate (and empty) destination(s).
The default destinations (Windows 7 SP1 and above) are:
Program Files
C:\Program Files\Altium\AD20
Shared Documents
C:\Users\Public\Documents\Altium\AD20
The default destinations (Windows 7 SP1 and above) are:
Program Files
C:\Program Files\Altium\NEXUS3
Shared Documents
C:\Users\Public\Documents\Altium\NEXUS3
To specify alternate locations, type the location directly into the applicable field, or click the folder icon at the right of a field and browse for the required destination folder.
Once the install locations are specified, click Next to continue.
Ready To Install
The Installer now has all the information it requires to proceed with the installation. If you need to change anything, click the Back button. If you want to cancel out of the install, click Cancel.
Ready to begin the install!
Ready to begin the install!
To proceed with the installation, click Next.
Installing Altium Designer
The page will change from Ready to Install to Installing Altium Designer and the installation will proceed, with the required files first being prepared (from the set of files contained within the unzipped Offline Installation package). Progress of this preparation is displayed within the Installer itself.
Installation commences by preparing the required set of install files.
Installation commences by preparing the required set of install files.
Once the preparation of files is complete, they will be installed, again with progress displayed in the Installer.
After the file preparation is complete, the software is then installed.
After the file preparation is complete, the software is then installed.
Installation Complete
When the installation itself completes, you have reached the end of the Installer wizard.
That's it, installation is complete!
That's it, installation is complete!
An option is provided to launch Altium Designer when you exit the Installer, which is enabled by default. Click Finish to exit the wizard.
That's it. You have installed Altium Designer on your computer and initially tailored its functionality to suit your design needs. You can now import any preferences from an earlier build, then license the software to work in an off-line, standalone fashion.
Sign in to Server
After installing and launching your new version of Altium NEXUS, the Sign in dialog will open. Use this dialog to sign in to a target server in which all your managed content is stored.
Sign in to your company's managed content Server.
Enter the URL for the target server's address into the Server Address field and your server access credentials (User Name and Password), then click the Sign in button.
Importing Preferences from a Previous Version or Major Release
After installing and launching your new version of Altium Designer, the Import Settings dialog will open in which you are given the opportunity to import preferences from the most recent previous installation at startup.
Import settings from your previous version's installation.
Not only will the preferences be imported, but the user settings will be copied across too - ensuring the new version opens with the same look and feel created in the previous version, even down to the last opened workspace and panel positioning!
If the option to import preferences on initial startup is not taken, don't worry – preferences can be quickly imported, at any time, from within the Preferences dialog. Click the 
button at the bottom of the dialog. The associated menu will list all previous versions/releases currently installed on the computer from which preferences can be imported.
Importing Preferences from a Previous Version
After signing in to your managed content Server, Altium NEXUS will continue to launch and the Import Settings dialog will open in which you are given the opportunity to import preferences from the most recent previous installation at startup.
Import settings from your previous version's installation.
Not only will the preferences be imported, but the user settings will be copied across too - ensuring the new version opens with the same look and feel created in the previous version, even down to the last opened workspace and panel positioning!
If the option to import preferences on initial startup is not taken, don't worry - preferences can be quickly imported, at any time, from within the Preferences dialog. Click the button at the bottom of the dialog. The associated menu will list all previous versions currently installed on the computer from which preferences can be imported.
Altium Customer Experience Improvement Program
As part of the initial launch of your newly installed version of Altium Designer, you will be asked if you would like to participate in Altium's Customer Experience Improvement Program. Since this program requires connection with Altium, it is not required for an offline installation, therefore, you can choose the Don't participate option on the Customer Experience Improvement Program page then click OK.
Licensing the Software
When Altium Designer starts, it will display the License Management page, as shown in the image below.
The License Management page - command central for getting Altium Designer licensed.
There are now two actions to perform in order to setup the software to work effectively offline:
- Configure Altium Designer to operate in an offline mode so that it will not attempt to contact Altium to validate licensing.
- Add a standalone license file, which is required to unlock Altium Designer's functionality.
Switching to Offline Mode
To switch Altium Designer to an offline mode, essentially severing the connection to Altium:
- Click on the Account preferences link. This gives access to the System - Account Management page of the Preferences dialog.
- Enable the No, I wish to remain disconnected from Altium option. By enabling this option, your installation of Altium Designer will stay completely disconnected from Altium. While disconnected, you will not be able to access or use any of the on-demand services that require a connection with Altium. In essence, this option is a 'full offline' switch.
- Click OK to accept the change and close the Preferences dialog.
Sever the connection with Altium's online services to place your installation in a fully Offline mode.
Sever the connection with Altium's online services to place your installation in a fully Offline mode.
In addition, confirmation that you are using an offline installation of the software can be seen on the System - Installation page of the Preferences dialog. The Offline installation option will be enabled with the path to the unzipped offline installation package folder.
Additional confirmation that you are using an offline installation.
Additional confirmation that you are using an offline installation.
Adding the License File
First, you need to procure the required Standalone license file. This can be downloaded by signing in to the AltiumLive community area of the Altium website, opening the Dashboard (clicking the Dashboard link at the top of the page) then going to the Licenses section. When you click on a license to examine the details, there is an Activate button. Click this to download the licensing file (*.alf) for that license.
With the Standalone license file acquired, you can now proceed to use that file to license your offline instance of Altium Designer. To do so:
- On the License Management page (within Altium Designer), click the Add standalone license file link.
- The Open dialog will open in which you can browse to and select the license file you just acquired.
Add the Standalone license file to complete the process.
Once you have selected the license file and returned to Altium Designer, the License Management page will display the license details, as shown below.
