Defining Harness Design Preferences for Altium Designer

現在、バージョン 20.1. をご覧頂いています。最新情報については、バージョン Defining Harness Design Preferences for Altium Designer の 24 をご覧ください。

The page in the Harness Design category of the Preferences dialog provides access to preferences relating to features and functionality of Harness Design.

For detailed information about Harness Designs, refer to the Harness Design page.

Defaults

The Harness Design - Defaults page of the Preferences dialog provides numerous controls relating to the default settings within the harness design space.

The Harness Design – Defaults page of the Preferences dialog
The Harness Design – Defaults page of the Preferences dialog

Default Primitives
  • Primitives - use this field to change the units.
  • Primitive List - a list of primitives that can be used in the harness design editor (filtered in accordance with the chosen entry for the Primitives field above). Click on the listed Primitives to change the available default values as described.

To view and edit the settings and options for each primitive, click on the desired entry in the Primitive List. Information for each primitive can be found at the following links:

The links below provide information on all properties available for harness design objects. Note that some properties are only available in the Properties panel during or after the placement and are not available as default settings in the Preferences dialog.

If you find an issue, select the text/image and pressCtrl + Enterto send us your feedback.
注記

利用できる機能は、Altium 製品のアクセスレベルによって異なります。Altium Designer ソフトウェア サブスクリプション の様々なレベルに含まれる機能と、Altium 365 プラットフォーム で提供されるアプリケーションを通じて提供される機能を比較してください。

ソフトウェアの機能が見つからない場合は、Altium の営業担当者に連絡して 詳細を確認してください。